Used Sollich Processing

Sollich Auger/Mixing Screw

• Manufacturer: Sollich

Sollich Auger/Mixing Screw - 12" diameter x 44" long auger - Stainless Steel jacketed trough - 2 HP, 3 phase, 60 cycle, 277/460 volt motor

Sollich 42" Inclusion Feeder

• Manufacturer: Sollich

Sollich 42" Inclusion Feeder - Stainless Steel Hopper - 42.5" wide belt width (35.5" between the nylon guides) - ½ HP, 3 phase, 60 cycle, 480 volt motor

2012 Sollich Germany Hammer mill sollich #904952

• Manufacturer: Sollich

Sollich Hammer Mill Type Massezufuhrs system 208 / 480 volts 60 hz Dimensions: 62 inch high x 100 inch length x 54 inch width Conveyor : 30 inch width x 60 inch length Made in Germany

SOLLICH 1 Cooling tunnel

• Manufacturer: Sollich

Type KS280

Water recooler SOLLICH - Type FKL-S-36, year of manufacture 1993.

• Manufacturer: Sollich

Decrystallizer/heat exchanger SOLLICH - Type , with approx. 1,000 kg hourly output.

• Manufacturer: Sollich

Decrystallizer/heat exchanger SOLLICH - Type , with approx. 1,000 kg hourly output.

• Manufacturer: Sollich

Pre-cooling channel SOLLICH - Type KK-280 with approx. 8.7 meters length.

• Manufacturer: Sollich

wire belt table SOLLICH - type TRT-280, with approx. 280 mm working width.

• Manufacturer: Sollich

Belt infeed table SOLLICH - Type 2.2 m transport table 520, built in 2017.

• Manufacturer: Sollich

The table was used as an infeed table on a TC-420 enrobing machine. However, the belt table has a working width of approx. 520 mm and a length of 2.2 meters.

Second-hand pralines take-off device - SOLLICH type Chocopack CP-820, year 1983/3.

• Manufacturer: Sollich

The machine is suitable for the automatic transfer of pralines or bars to the plastic plates. Four vertically arranged feed belts group the pralines into a tight product rope in a careful way. The drive of all fo...

90° curve table SOLLICH - Type GT-420-90°R with approx. 420 mm working width.

• Manufacturer: Sollich

extruder molding line HOPPE/SOLLICH - Type KBF-KK-GS with approx. 280 mm working width:

• Manufacturer: Sollich

The system for producing product strands that can be cut to length using a guillotine. G13085 used extruder Hoppe type KBF-280 with feed hopper, feed rollers and mouthpiece, for forming 5 mass strands. These are ...