Used Sollich Processing in Germany

tempering machine SOLLICH - type MST-4000

• Manufacturer: Sollich

The large cooling surface of the three cooling stages and the long dwell time of the mass in the machine are decisive for optimal temperature control. An evenly fine crystal structure is achieved by frequently sc...

Nougat tempering machine Sollich - type NT-300

• Manufacturer: Sollich

The machine for tempering nougat or fat masses, by means of a screw tempering unit. This machine can be used to feed skin-pass moulding or extrusion lines where the masses require plasticization from a liquid to ...

Decrystallizer/heat exchanger SOLLICH - Type , with approx. 1,000 kg hourly output.

• Manufacturer: Sollich

Decrystallizer/heat exchanger SOLLICH - Type , with approx. 1,000 kg hourly output.

• Manufacturer: Sollich

filling device SOLLICH with oscillating sieve - suitable for a tempering machine of type 100-FD.

• Manufacturer: Sollich

wire belt table SOLLICH - type TRT-280, with approx. 280 mm working width.

• Manufacturer: Sollich

SOLLICH disc tempering machine - Type MSV-1000-A3 for approx. 1,000 kg per hour.

• Manufacturer: Sollich

The machine for pre-crystallizing chocolate masses is a further development of the proven MST type. The large cooling surface of the three cooling stages and the long residence time of the mass in the machine are...

SOLLICH disc tempering machine - Type MSV-1000-A3 for approx. 1,000 kg per hour.

• Manufacturer: Sollich

The machine for pre-crystallizing chocolate masses is a further development of the proven MST type. The large cooling surface of the three cooling stages and the long residence time of the mass in the machine are...

90° curve table SOLLICH - Type GT-420-90°R with approx. 420 mm working width.

• Manufacturer: Sollich

Belt infeed table SOLLICH - Type 2.2 m transport table 520, built in 2017.

• Manufacturer: Sollich

The table was used as an infeed table on a TC-420 enrobing machine. However, the belt table has a working width of approx. 520 mm and a length of 2.2 meters.

Second-hand pralines take-off device - SOLLICH type Chocopack CP-820, year 1983/3.

• Manufacturer: Sollich

The machine is suitable for the automatic transfer of pralines or bars to the plastic plates. Four vertically arranged feed belts group the pralines into a tight product rope in a careful way. The drive of all fo...

extruder molding line HOPPE/SOLLICH - Type KBF-KK-GS with approx. 280 mm working width:

• Manufacturer: Sollich

The system for producing product strands that can be cut to length using a guillotine. G13085 used extruder Hoppe type KBF-280 with feed hopper, feed rollers and mouthpiece, for forming 5 mass strands. These are ...

tray-unstacker in stainless steel version - for rectangular plastic product trays.

The stacked plastic trays are fed into a magazine from above. The width of the magazine can be adjusted with a hexagon tool, which allows the lifting spindles to be adjusted continuously. The plastic trays are no...

Soft mass former OTTO KREMMLING - Type Automat TBA-600/1, built in 2004.