Used Processing in Saxony, Germany

ROEMHELD high pressure filter

• Manufacturer: ROEMHELD

High pressure filter ROEMHELD, HILMA, STRONG 3887-087 FA144458 New !

ELEKTROR radial fan

• Manufacturer: Elektror

Radial fans, radial blowers, radial high-pressure fans with belt drive ELEKTROR Karl W. Müller V-belt pulley ( fan ): Diameter: Ø 80 mm, 2 grooves, groove width: 10 mm Motor : ATB, FLENDER, LOHER Type: A 112M/4/2...

MANN + HUMMEL air filter

• Manufacturer: Mann+Hummel

Air filter MANN + HUMMEL, KAESER 45 650 92 172 used, tested !

VEM axial fan

• Manufacturer: VEM

Axial fan, axial blower, axial ventilator VEM, ILKA VAO 250 / 401 TGL27476 Motor: DM102/4-AV6/514 0.025 kW 1380 rpm 220 / 380 V New !

SONDERMANN PUMPEN Filter housing upper section

1995 PULL DISC HARROW Outer diameter: Ø 106 mm | Internal diameter: Ø 96 / 102 mm | Hole circle diameter: Ø 134 mm | Connection: DN40 | Material: PP | Dimensions: 192 x 156 x 133 mm

WOODS tube fan

• Manufacturer: Woods

Axial fan, axial tube fan, with protective grille WOODS 56JM/20/2/3/14-24 3 S F2225 2910 rpm 380 / 420 V 3AC 50 Hz IP55 used, tested !

SEMO-TEC filter mats

Filter mats, single layer SEMO-TEC V600G F5 New ! Material width: 1450 mm | Material thickness: 25 mm | Roll length: approx. 20 m | Material: Polyester | Dimensions ( packaging ): 1570 x 340 x 340 mm

ORSTA Micro-S filter insert

• Manufacturer: Orsta

Micro-S filter insert ORSTA, FILTER TECHNOLOGY GERA MS200 Thread diameter: Ø 89 mm, Pitch: 2.0, Length: 15 mm New !

PAGUS sieve mesh with holder

• Manufacturer: Pagus

Screen mesh with holder PAGUS G14/5 1x U-profile for hanging 1x flat profile with three welded-on screws for tensioning Screw size: M10 x 1.5, length: 60 mm Material: Stainless steel ( 1.4301 ) New !

PAGUS sieve mesh with holder

• Manufacturer: Pagus

Screen mesh with holder PAGUS SR20/6 1x U-profile for hanging 1x flat profile with three welded-on screws for tensioning Screw size: M10 x 1.5, length: 100 mm Material: Stainless steel ( 1.4301 ) New !

ELEKTRIM radial fan

Centrifugal fan, radial blower, radial ventilator ELEKTRIM Motor : SKF71-28 0,55 kW 2810 rpm 220 / 380 V 3AC 50 Hz IP44 used, tested !

ECOCOLD cooling unit

Cooling unit, heat exchanger, cooler, chiller ECOCOLD AWP 10 Pump: KSB Multi Eco 35 D 0.8 kW 220 - 240 / 380 - 415 V 3AC 50 Hz Fan: ZIEHL-ABBEGG 104838 0.015 kW 870 rpm 230 V 1AC 50 Hz used, tested !

VEM axial fan

• Manufacturer: VEM

Axial fan, axial blower, axial ventilator VEM, MACHINE FACTORY NEMA LANW 355 TGL27476 Motor: ALM 102/4-A1 ( ALM102/4-A1 ) 0,06 kW 1400 rpm 220 / 380 V 3AC 50 Hz used, tested !

ZIEHL-ABEGG axial fan

• Manufacturer: Ziehl-Abegg

tamaño de cocción Wheel: Ø 350 mm | Grid diameter: Ø 400 mm | Material ( impeller ): aluminum | Engine: 0,25 kW | Dimensions: 420 x 420 x 180 mm

ILKA ceiling air heater

Ceiling air heater, heat exchanger, with fan ILKA, MASCHINENFABRIK Nema Type P20 TGL 180-1100 Fan: Impeller: Ø 240 mm Motor: VEM KMO 56 G 6 0.12 kW 870 rpm 220 / 380 V 3AC 50 Hz IP44 galvanized New, with document...