Used Machine Tools in Friesland, Netherlands

Centauro Band Saw 600 CL

• Manufacturer: Centauro

Machine technical data: - Wheel diameter 600 mm - Motor power unknown - Upper and lower guide - Limit switches on the doors

2008 Tecnomax Band Saw S 600 P

Technical data machine: - Wheel diameter 600 mm - Engine power 2.2 kW - Built in 2008 - Upper and lower guides - Limit switches on the doors

2007 Harrison Alpha 1550XS

• Manufacturer: Harrison
• Model: Alpha 1550XS

Swing: 554 mm over bed 370 mm over cross slide Featured with: - 1x Fixed steady Ø 245 mm - 1x Fixed steady Ø 390 mm - 18 Parat toolpost holders - Various jaws for chuck - Centre points - Cooling unit - Machine Ma...

Geminis CNC 5 PLUS 870/3000

• Manufacturer: Geminis
• Spindle Bore: 162 mm

Swing: 870 mm over bed 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Featured with: - Additional chuck at back end of main spindle (oilcou...

Safan VS255-6

• Manufacturer: Safan
• Model: VS255-6

Featured with: - 3 Sheetsupports frontside - Access protection backside - Footpedal

2006 Darley GS 3110 CL

• Manufacturer: Darley

Featured with: - Sheetsupporters frontside 3000 mm - Footpedal - Extra sets knives - Adjustable angle guide in degrees, - Documentation

Rasi GR45

• Manufacturer: Rasi

Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit

B&S Massey 150

• Manufacturer: B & S
• Stroke: 480 mm

Hammer weight: 150 kg | Stroke: 480 mm | Strokes: 168 p/min. | Throat: 375 mm | Ram diameter: 180 mm | Motor power: 11 kW | Machine lxwxh: 200 x 180 x 240 cm | Machine weight: 6000 kg

2007 Huvema HU1010B

• Manufacturer: Huvema
• Spindle Bore: 52 mm

Swing: 330 mm over bed 160 mm over cross slide Featured with: - 1x fixed steady, 1x moving steady - Gearwheels-set - Flat chuck - Chuck protection hatch - Cooling unit

Myford Super 7

• Manufacturer: Myford
• Model: SUPER 7
• Spindle Bore: 15,5 mm

Swing: 178 mm over bed 100 mm over cross slide Featured with: - Rohm 3-jaw chuck with various jaws - Gearwheels-set - Collet-set - Manuals

Amada GHE 630

• Manufacturer: Amada

Featured with: - Sheet support backside - 3 Sheetsupports frontside - Footpedal

1999 Darley GS1250x13

• Manufacturer: Darley

Featured with: - Sheetsupporters frontside 3000 mm - Footpedal - Material conveyor - Extra sets knives - Documentation

Amga 2-303

• Manufacturer: Amga

Bendingcapacity: 3/8" - 2" | Bending angle: 180° | Revolverbending: 6-fold | Attached bendingtool: Ø 28 mm | Motor power: 3 kW | Machine weight: 250 kg | Machine lxwxh: 1.000 x 800 x 950 mm

1998 Darley GS4100x13

• Manufacturer: Darley

Featured with: - Sheetsupporters frontside 4000 mm - Footpedal - Material conveyor - Extra sets knives - Documentation

Weingarten AR-80

• Manufacturer: Weingarten
• Capacity: 80 Ton
• Stroke: 8 -112 mm

Complete with: - Pneumatic clutch - Safety screen Capacity: 80 Ton | Table surface: 750 x 550 mm | Ram adjustment: 80 mm | Stroke length: 8 -112 mm | No. of strokes: 78 p/min. | Throat: 400 mm | Machine lxwxh: 2...