Used Processing in Poland

BATTENFELD BA 600 CDC

• Manufacturer: Battenfeld
• Model: BA 600 CDC

The was built in Austria in 2002. It is equipped with control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection...

VICTOR MSZ 30

• Manufacturer: Victor

was produced in 2015. The machine is used to produce bottles with a maximum height of ≤190mm and a maximum diameter of ≤100mm. It has a screw with a diameter of 40 mm, running at a speed of 10 to 225 revolutions ...

ZWUT PSK-1

• Manufacturer: ZWUT

was manufactured in Poland. The furnace is used for various types of laboratory and industrial work. The heating chamber of the furnace is resistant to high temperatures, thanks to fireclay and thermal insulation...

GT85 GT 2000-3P ultrasonic cleaner

The was manufactured in 2008. The machine consists of three bathtubs – the first bath is used for washing and phosphating, the second bath is used for rinsing and the third bath dries the product. The washing bat...

MAYER & MAYER DXR R2020R L-P-PUB PDX20 40-100 P

• Manufacturer: Mayer

of German manufacture was manufactured in 2015. The device is a filling station for hand-held dispensers with two-component glue with low and medium viscosity. The glue is loaded from pails or drums with a capaci...

ATLAS COPCO FX 7

• Manufacturer: Atlas-Copco
• Model: FX 7

was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...

BATTENFELD TM 1300

• Manufacturer: Battenfeld

was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...

Compressor Suction EKOM DUO/M (with box, with membrane dryer)

New, Made in Slovakia, Compressor DK50 PLUS + Suction machine Technical data: Frequency: 230V/ 50 (60) Hz Number of dental sets: 1 Control voltage: 24/0.1 V/A DC/AC Compressor capacity (operating pressure 5-7bar)...

SUCTION PUMP FOR EKOM 2.1-10 (stationary mammal in a box)

new Slovak production, Mammal in silent housing size DK50.10S, The mammal is standard equipped with a control module that starts the device after 24V AC / DC signal from the unit. The box effectively reduces the ...

SUCTION PUMP FOR EKOM 2.1Z (stationary mammal without housing)

new Slovak production, Mammal without silencing housing, The mammal is standard equipped with a control module that turns on the mammal after 24V AC / DC signal from the unit, Technical data: Rated voltage / freq...

Compressor and Mammal EKOM DUO 2 (with box)

New, Made in Slovakia, Compressor DK50 2V + 2 suckers Technical data: Frequency: 230V/ 50 (60) Hz Number of dental sets: 2 Control voltage: 24/0.1 V/A DC/AC Compressor capacity (operating pressure 5-7bar): 140 l....

EKOM DUO Compressor and Suction (with box)

New, Slovak Manufacture, Compressor DK50 PLUS + Suction, Technical data: Frequency: 230V/ 50 (60) Hz Number of dental sets: 1 Control voltage: 24/0.1 V/A DC/AC Compressor capacity (operating pressure 5-7bar): 75 ...

2020 MILCOM A.S PA1

• Manufacturer: MILCOM A.S

Forming, filling, and wrapping machine for pasty products.

2019 MULTIVAC T300

• Manufacturer: Multivac
• Model: T300

MULTIVAC T300 for packaging in gas-filled barrier trays is characterized by an innovative design and high efficiency.

2020 ILPRA FoodPack Speedy VG

• Manufacturer: Ilpra

680 kg Maximum welding area: 380x270x135 mm | Dimensions: 1576x932x2867mm | Weight: Approx.