New & Used combined in Germany

Claas combine #M0283
- Manufacturer: Claas
- Hours: 2,050 h
- Cutting width: 3.9 m
mech. drive, 5x shaker Operating hours: 2050 | Engine performance: 88 kW | Cutting tool width: 3,90 m | Set of tyres - back: 12.5 R 18 - 70 % | Set of tyres - front: 23.1 R 26 - 70 % | Shaker count: 5 | Comments:...
Bremen, Germany
1992 Case Combine Harvester #M0911
- Manufacturer: Case IH
- Hours: 2,932 h
- Cutting width: 6 m
Operating hours: 2932 | Engine performance: 173 kW | Cutting tool width: 6,00 m | Set of tyres - back: 380/70R24 | Set of tyres - front: 24.5-32 | Comments: Häcksler, Rotor, Klima
Bremen, Germany
John Deere combine #M0906
- Manufacturer: John Deere
- Hours: 3,160 h
- Cutting width: 4.85 m
Operating hours: 3160 | Engine performance: 155 kW | Cutting tool width: 4,85 m | Set of tyres - back: 30.5L32 | Set of tyres - front: 16.5/85-24 | Shaker count: 5 | Comments: Klima, Pendelausgleich, Verlustanze...
Bremen, Germany
2017 Case combine harvester #M0908
- Manufacturer: Case IH
- Hours: 1,800 h
Operating hours: 1800 | Engine performance: 366 kW | Set of tyres - back: 620/70R26 | Set of tyres - front: 800/70R38 | Comments: Klima, Luftsitz, Umkehrgetriebe, Rückfahrkamera, AdBlue, autom. Höhenanpassung, S...
Bremen, Germany
1996 Deutz combine #M0905
- Manufacturer: Deutz
- Hours: 3,407 h
- Cutting width: 4.2 m
mach. Drive, slope compensation, chopper Operating hours: 3407 | Engine performance: 125 kW | Cutting tool width: 4,20 m | Set of tyres - back: 10.5-18 | Set of tyres - front: 23.1-26 | Shaker count: 5 | Comments...
Bremen, Germany
2008 Fendt combine #M0722
- Manufacturer: Fendt
- Hours: 1,628 h
- Cutting width: 6.5 m
Climate, on-board computer, all-wheel drive, slope compensation, loss measurement, throughput control, reel horizontal adjustment, reversing device, pendulum compensation, cutterbar guidance automatic, hydr. driv...
Bremen, Germany
2006 Claas combine #M0751
- Manufacturer: Claas
- Cutting width: 7.5 m
All-wheel drive, chopper, loss measurement, yield measurement, pendulum compensation, chaff spreader, throughput control, reel horizontal adjustment, reversing device, on-board computer
Bremen, Germany
2003 John Deere combine #M0902
- Manufacturer: John Deere
- Hours: 2,500 h
- Cutting width: 6 m
hydraulic drive, air conditioning, reversing device, horizontal reel adjustment, throughput control, on-board computer
Bremen, Germany
1993 Laverda / Fiatagri combine #M0804
- Manufacturer: Laverda
- Hours: 4,976 h
- Cutting width: 6 m
climate, stone catcher, hydr. drive, autom. height adjustment, reel horizontal adjustment
Bremen, Germany
2006 John Deere combine #M0801
- Manufacturer: John Deere
- Hours: 2,377 h
- Cutting width: 6 m
Yield and moisture measurement, monitor, stone catcher, grain tank extension, height adjustment, John Deere 620 cutterbar + wagon, available at extra cost
Bremen, Germany
2002 Massey Ferguson combine #M0698
- Manufacturer: Massey Ferguson
- Hours: 2,005 h
- Cutting width: 5.5 m
Air conditioning, chaff spreader, fine chopper, reversing device, long auger, Datavision, all-wheel drive, with wagon without power flow
Bremen, Germany
1999 Massey Ferguson combine #M0691
- Manufacturer: Massey Ferguson
- Hours: 2,100 h
Power Flow cutterbar, chopper, loss indicator, on-board computer, reversing device, air-conditioning, hydr. drive
Bremen, Germany
1994 John Deere combine #M0650
- Manufacturer: John Deere
- Hours: 2,368 h
- Cutting width: 6 m
Air conditioning, radio, loss indicator, chopper, hydraulic drive, reversing device
Bremen, Germany
1996 Claas combine #M0775
- Manufacturer: Claas
- Hours: 3,512 h
- Cutting width: 5.1 m
Operating hours: 3512 | Engine performance: 125 kW | Cutting tool width: 5,10 m | Set of tyres - back: 650/75R34 | Set of tyres - front: 500/60-22.5 | Shaker count: 5 | Comments: Häcksler, 3-D, Reversiereinricht...
Bremen, Germany
2003 Claas combine #M0663
- Manufacturer: Claas
- Cutting width: 6 m
Auto Contour, on-board computer, throughput control, yield measurement, pendulum compensation, reversing device, automatic cutterbar guidance, loss measurement, chaff spreader, chopper, air conditioning, cutterba...
Bremen, Germany
Case IH Axial-Flow 7150 Combine
- Manufacturer: Case IH
- Model: Axial-Flow 7150
Good condition Case IH Axial-Flow 7150 Combines available between 2019 and 2023 years. Located in USA and other countries. Click request price for more information.
USA