1995 220 TON SIMAC FLYING COLD PRODUCT SHEAR FOR ANGLES, CHANNELS, AND FLATS (NCO)
- Manufacturer: Simac
Inventory id: 20081500000 | Product size (width): 3/4" TO 2-1/2" ANGLE; 1" TO 4" CHANNELS; 1/2" TO 4" FLATS; #3 TO #14 REBAR; 1/2" TO 1.25 ROUNDS | Model number: CVMF 200 | Type material: STEEL | Material shape...
Pittsburgh, PA- Trusted Seller
Simac model CA 80 TC
- Manufacturer: Simac
Additional Info: Cutting force: 80 to 100 tons Cutting frequency: 40 cuts per min Blade stroke: 170 mm Blade width: 300 mm Motor power: 11kW Weight: 7,500kg (16,500 lbs) Floor to cutting Centerline - 650mm Shear ...
Rockville Centre, NY 
1993 QTY (4) 80 FEET OF INDIVIDUALLY DRIVEN ROLL TABLES FOR 16" BUNDLES OF BEAMS, ANGLES, AND FLATS, TOTAL 320 FT
- Manufacturer: Simac
Inventory id: 20081800600 | Roll face: 17 3/4" | Roll diameter: 9 1/2" | Number of rolls: 20 | Motor hp: 3 HP | Motor rpm: 1760 | Motor voltage type (ac / dc): AC
Pittsburgh, PA
1993 90 FEET OF INDIVIDUALLY DRIVEN ROLLER TABLES FOR ANGLES, CHANNELS, AND FLATS, TOTAL OF 20 ROLLS ON 4-1/2' CENTERS
- Manufacturer: Simac
Inventory id: 20081800100 | Roll face: 31.5" | Roll diameter: 10.5" | Number of rolls: 16 | Gearbox ratio: 31.36 / 1 RATIO REDUCER | Motor hp: 1 HP | Motor rpm: 1760 RPM | Motor voltage type (ac / dc): AC
Pittsburgh, PA
1995 5 OVER 5, MULTI-STAND SHAPE STRAIGHTENER FOR ANGLES, CHANNELS AND FLATS (NCO)
- Manufacturer: Simac
Inventory id: 20081400000 | Number of planes: 1 | Direction of travel: LEFT TO RIGHT VIEWED FROM OPERATORS SIDE | Speed of straightener min.: 295 FPM | Speed of straightener max: 500 FPM | Number of motors: 1 | ...
Pittsburgh, PA
1993 40 FT. INDIVIDUALLY DRIVEN ROLLER TABLES
- Manufacturer: Simac
Inventory id: 20081500100 | Roll face: 31.5 | Roll diameter: 10.5 | Number of rolls: 9 | Gearbox ratio: 56.123/1 REDUCER | Motor hp: 1 HP AC MOTOR 1750 RPM | Motor rpm: 1750 | Motor voltage type (ac / dc): AC |...
Pittsburgh, PA
1993 63 FEET OF INDIVIDUALLY DRIVEN ROLLER TABLE FOR ANGLES, CHANNELS, AND FLATS
- Manufacturer: Simac
Inventory id: 20081800200 | Roll face: 31.5" | Roll diameter: 10.5" | Number of rolls: 16 ROLLS ON 47" CENTERS | Gearbox ratio: 31.36 / 1 RATIO REDUCER | Motor hp: 1 HP | Motor rpm: 56 RPM | Motor voltage type (...
Pittsburgh, PA
1993 90 FEET OF INDIVIDUALLY DRIVEN ROLLER TABLES FOR ANGLES, CHANNELS, FLATS (NCO)
- Manufacturer: Simac
Inventory id: 20081402900 | Roll face: 31.5 | Roll diameter: 10.5 | Length: 90 FEET
Pittsburgh, PA- Trusted Seller
1998 4" SMS (SIMAC) RL230-2M Vertical 2-Roll Rotary Straightener,
- Manufacturer: Simac
Additional information: Machine complete with: Entry Roller Table accommodates 12 meter bars Entry pinch-roll Machine with gear-boxes and motors Exit pinch-roll Exit Table Electric equipment, with operator’s pulp...
Rockville Centre, NY 
80-100 T Simac Cold Product Shear SHPS-200833
- Manufacturer: Simac
80-100 T Simac Cold Product Shear SHPS-200833 Direction: Left to Right Drive type: Pneumatic brake and clutch Cutting force: 80-100 MT Blade width: 300 mm Blade Stroke: 170 mm
Plainville, CT
1997 STRAIGHTEN, SHEAR, STACK AND BAND LINE FOR ANGLES, CHANNELS AND FLATS (NCO)
- Manufacturer: Simac
Inventory id: 20081810000 | Previous use: CONTINUOUS CUT LINE FOR SHAPED | Material processed (steel, stainless, etc.): STEEL | Type (non-cont. or continuous): CONTINUOUS | Direction of travel (viewed from opera...
Pittsburgh, PA
SMS/Simac RL230-2M 2-Roll Vertical Bar Straightener
- Manufacturer: Simac
Comprises: Bar Storage Table Ingoing Roller Table Exciter Rolls Straightener Exit Pinch Rolls Outgoing Bar Table Hydraulic Pack Electrical Controls Spares
United Kingdom
1998 SIMAC/SMS RL230-2M
- Manufacturer: Simac
Capacity: 20 - 100mm | Bar length: 3 - 12m | Speed: 60 m/min
Sheffield, United Kingdom
1998 SIMAC / SMS-MEER RL 230-2M
- Manufacturer: Simac
Machine was retrofitted (Eletric) and not much used 2 roller straightening machine, fully hydraulic and equipped with: - Siemens PLC/SPS control system - Hydraulic roller - Loading table with chain transport - In...
Monheim am Rhein, Germany
Simac 200 notching machine
- Manufacturer: Simac
Used Notching Machine Simac 200 Notching Machine Fixed Angle 200
Solbiate Olona, Italy
Tip: Enter manufacturer, model or keyword