Used Heat Exchangers in New Jersey, USA

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 207464

• used

• Manufacturer: Ketema

Size is 10-A-108 Shell side MAWP is 150 psi at 400 degrees F. MDMT; is -20 degrees at 150 psi

Stainless Steel APV Plate and Frame Heat Exchanger - IPP# 204579

• used

• Manufacturer: APV

maximum temperature is 410 degrees F

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 232712

• used

• Manufacturer: APV/Hebeler

Minimal design metal temp.=-20 degrees F at 200 psi.

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 216388

• used

Certification: Certified by WFT GmbH MDMT 319 degrees F at 450 psi Volume: 89.70/90.3 WD (Water Distribution): 10-300

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 214850

• new

• Manufacturer: Alfa Laval

CRN L-4646.57 Print weight is 6247 lbs The frame plates are SA-516-70 CS With (418) channel plates

Stainless Steel Austenitic Air Fin Heat Exchanger - IPP# 222357

• used

• Manufacturer: Balke Durr

fin fan overhead cooler design pressure 3.2 bar @ 135 degrees C working pressure 1 bar @ 60 degrees C fins are 54mm diameter (2) appox 46.5 m3/second type LPVT 4 ventilator fans mounted underneath 2500mm diameter

CHERRY BURRELL 6SSHE

• used

• Manufacturer: Cherry Burrell
• Model: 6SSHE

(2) used Cherry Burrell Scraped Surface Heat Exchangers/Votator/Contherm. 9 Sq.Ft. Horizontal 6" X 72", 15 HP. Units mounted on one Stainless Steel frame. Jacket Rated 150 PSI @ 375 Deg.F. MDMT -20 @ 150 PSI. She...

ALFA LAVAL H7-RC

• used

• Manufacturer: Alfa-Laval
• Model: H7-RC

used 220 Sq.Ft. ALFA LAVAL Plate Heat Exchanger/Pasteurizer. Type H7-RC. Unit has (44) 48" x 15.5" Plates is 3 Zones. Zone 1 has (10) Plates; Zones 2 and 3 have (17) plates each for approx 220 Sq.Ft total area...

Shell and Tube Heat Exchanger 545 m² (5,866 ft²) Carbon Steel - IPP# 246934

• used

• Manufacturer: Houston Heat Exchanger

After Cooler With expansion joint

Hastelloy C22 Calorifier Shell and Tube Heat Exchanger - IPP# 247267

• used

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 229451

• used

Duty: 1.41 MW

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 246071

• used

• Manufacturer: Ward Tank Co

Note: the NB Papers report this unit to be vertical, however it is set to be in the horizontal position. (AS)

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 246073

• used

• Manufacturer: Atlas Industrial

Tema Type BEM size 48-240 Vacuum Condenser

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 241133

• used

• Manufacturer: Enerquip LLC

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 245568

• used

• Manufacturer: RAS Process Equipment