Used Threading & Tapping

Trusted Seller
1981 WARREN INDUSTRIES WT-1000
- Manufacturer: Warren
- Model: WT-1000
Die requirement: "0" or "00" | Production: up to 1000 PPM | Screw diameter capacity: #2 to #12 | Blank length maximum: Up to 3" | Approx. weight: 4,500 lbs | Equipped with: With Vibratory Bowl
Ivyland, PA
Trusted Seller
1997 KYOEI SR-15
- Manufacturer: KYOEI
Production: 400 PPM | Maximum depth of die face: 2.125" - 2.362" | Thickness of dies: .811" (20.6mm) | Length of moving die: 4" (101.6mm) | Length of stationary die: 3.5" (88.9mm) | Motor: 5 HP | Approx. floor s...
Ivyland, PA
Trusted Seller
REED D44EH
- Manufacturer: Reed
- Model: D44EH
Spindle diameter: 1.58" | Thread/form diameter (in-feed): 1-1/2" (40mm) | Thread/form diameter (thru-feed): 5/8" (16mm) | Thread/form length (in-feed): Up to 3" (80mm) | Thread/form length (thru-feed): 20 Ft (6m...
Ivyland, PA
Trusted Seller
HARTFORD 20-225
- Manufacturer: Hartford
- Model: 20-225
- Threading length: 76.19999999999999 millimeter
Screw diameter capacity: 1/4" thru 1/2" | Maximum thread length: to 3" | Thread length at max. diameter: 1-1/2" | Maximum shank length: 4" | Production rate: 135 - 225 PPM | Die pocket depth: 3-1/8" | Flat die s...
Ivyland, PA
Trusted Seller
TSUGAMI R15A
- Manufacturer: Tsugami
- Model: R15A
- Threading length: 150 millimeter
Maximum rolling force: 15 TON (M) | Maximum rolling capacity infeed: 75mm | Maximum thread length (infeed): 150mm | Spindle diameter: 54mm | Spindle speeds: (4 Step) 20, 36,58, 82 RPM | Max thread pitch: 5mm | S...
Ivyland, PA
Trusted Seller
1996 ROLLMAX 5NF
- Manufacturer: ROLLMAX
- Threading length: 76.19999999999999 millimeter
Production: 1500 PPM | Screw diameter capacity: .050" - .375" | Thread length capacity: 3" | Approx. floor size: 54" W x 66" L x 64" H | Equipped with: 42" Vibratory Bowl
Ivyland, PA
Trusted Seller
HARTFORD A-190-M
- Manufacturer: Hartford
- Model: A-190-M
Thread length capacity: 1/8" to 1-1/2" | Screw diameter capacity: #0 thru #10 | Die pocket depth: 1-5/8" | Maximum speed: 175 PPM | Motor: 3 HP | Approx. floor size: 4' x 5' | Approx. weight: 1,600 lbs
Ivyland, PA
Trusted Seller
HARTFORD 190
- Manufacturer: Hartford
- Model: 190
Blank length maximum: up to 1-3/4" | Thread length capacity: 1/8" - 1-1/2" | Screw diameter capacity: #0 (.060") - #10 (.190") | Maximum speed: 175 PPM | Approx. floor size: 4' x 5' | Approx. weight: 1,600 lbs |...
Ivyland, PA
Trusted Seller
HARTFORD 312
- Manufacturer: Hartford
- Model: 312
Production: 33 - 150 PPM | Screw diameter capacity: No. 6 (.138) through 5/16" | Thread length capacity: 1/8" - 2-1/2" | Die pocket depth: 2-5/8" | Approx. floor size: 4' x 6' | Approx. weight: 4,750 lbs | Equip...
Ivyland, PA
Trusted Seller
NATIONAL MACHINERY 0-500
- Manufacturer: NATIONAL MACHINERY
- Threading length: 76.19999999999999 millimeter
Diameter: .086" - .190" (#2 thru #10) | Production: 250 - 500 PPM | Blank length maximum: 3" | Thread length (maximum): 3" | Electrics: 240V / 3 Phase | Approx. weight: 3,500 lbs | Approx. floor size: 5' x 6' | ...
Ivyland, PA
Trusted Seller
PRUTTON 75A-24
- Manufacturer: Prutton
- Model: 75A-24
- Threading length: 50.8 millimeter
Capacity: #4 Screws to 1/4" | Maximum thread length: 2" | Maximum length under head: up to 3" | Overall nail blank lengths: up to 2-1/2" | Speed range: up to 600 PPM | Approx. weight: 2500 lbs | Approx. floor si...
Ivyland, PA
Trusted Seller
MANVILLE #70 1000-C
- Manufacturer: Manville
Maximum thread diameter: 1-1/4" | Depth of die pockets: 6-1/8" | Strokes per minute: Approx. 40 | Length of moving die: 20" | Length of stationary die: 19" | Distance between top of die block & bottom of tie rod...
Ivyland, PA
Trusted Seller
Regal Cutting Tools 015712AS 1-1/4" Pipe Tap
- Manufacturer: Regal
Regal Cutting Tools 015712AS 1-1/4" Pipe Tap 1-1/4-11 BSPP 55DEG M0 D 5FL PIPE
$175 USD
Millis, MA
Trusted Seller
TESKER 840
- Manufacturer: TESKER
Diameter: Max Diameter 15" (380mm) | Rolling pressure: 500,000 LBS Continuous / 600,000 Intermittent | Spindle diameter: 5 1/2" (139mm) | Die face (maximum): 15" (380mm) | Die diameter (maximum): 16" (400mm) | S...
Ivyland, PA
Trusted Seller
KINEFAC MC-4 CNC 2- Roll
- Manufacturer: KINEFAC
Spindle diameter: 1-1/2" (40mm) | Maximum die width: 2-5/8" (115mm) | Die diameter range: 3 - 4 - 3/8" (75mm - 110mm) | Minimum diameter in or thrufeed: 1/32" (1mm) | Maximum diameter thru feed: 3/4" (20mm) Unli...
Ivyland, PA
Prutton 125B-HV Threading & Tapping
- Manufacturer: Prutton
- Model: 125B-HV
Good condition Prutton 125B-HV Threading & Tappings. Located in Canada and other countries. Click request price for more information.
Canada