Machine Tools » Drilling Tools » Spain

Search By Manufacturer

Search By Autonomous Community

Building Filters

Related Events

Live Now

Complete Plant Closure - Assets from a Leading Agricultural Blade Plow and Tillage Tool Manufacturer

by Perfection Global, LLC

Online
Ends Jan 20th, 16:00 CST
View event
9

Used Drilling Tools in Spain

  • Trusted Seller
    DRILL

    DRILL

    • Manufacturer: DETECTED_MANUFACTURER

    Drill / screwdriver lot.

    Barcelona, Spain
  • Trusted Seller
    DEWALT DRILL

    DEWALT DRILL

    • Manufacturer: DeWalt

    Drill screwdriver, with charger and battery.

    Barcelona, Spain
  • Trusted Seller
    IMAPORT TR-251M

    IMAPORT TR-251M

    • Manufacturer: IMAPORT

    Speeds: 16Capacity: 25 mm, Revolutions: 100 to 3,000 rpm, 230V, 1.5 HP, 50Hz.

    Spain
  • Stems for conventional drilling

    Stems for conventional drilling

    • Manufacturer: talleres segovias.l

    Hammer bottom and hammer head carvings in all sizes, from ø87mm to ø1.000mm.

    Fuenlabrada, Spain
  • Spreader cutters

    Spreader cutters

    • Manufacturer: talleres segovias.l

    To re-drill an existing bore to a larger diameter

    Fuenlabrada, Spain
  • Stabilizers

    Stabilizers

    • Manufacturer: talleres segovias.l

    To connect on top of the hammers at the bottom and ensure the verticality of the boreholes. They are of helical type to minimize the rotation torque of the equipment and are manufactured with widia buttons along ...

    Fuenlabrada, Spain
  • 2002 Case 6010

    2002 Case 6010

      Condition: Good condition Displacement 122 cubic inches Inlet angle 0° to 20°. Fuel tank capacity 24.5 gal Ground drive speed 1.8 mph Height 65.1 in. Hydraulic tank capacity 21.5 gal Joint diameter 2.25 "(57 mm) ...

      $21,242 USD

      Get financing

      Est. $400/mo

      Utrera, Spain
    • 2005 MOLLART LD2-500 Drilling Machine

      2005 MOLLART LD2-500 Drilling Machine

      • Manufacturer: Mollart

      Weight: 3500 kg | Yom: 2005 | Min-max drilling diameter: 2-20 mm | Max drilling depth: 500 mm | Drill feed range: 0-3000 mm/min | Engine power: 5.5 kW | Extra: Counter rotating workpiece, Chip Conveyor, High Pre...

      Asturias, Spain
    • ANTONIO ALGUACIL EN/8

      ANTONIO ALGUACIL EN/8

      • Manufacturer: ANTONIO ALGUACIL

      A HEAD COMPOSED OF 8 DRILLS TO WORK WITH TWO INDEPENDENT FIELDS OF TERMS EACH ONE UP TO 24CM WIDTH PNEUMATIC CLAMP FOR WORKPIECE CLAMPING 2.2KW MOTOR

      Madrid, Spain