Used Punch Machines in Germany

Hoza EMU punch cutting machine press

• Manufacturer: Hoza

This machine is ideal for punching small shaped parts from paper, rubber, or textiles. It has a high pressing force and fits on any sturdy table. The cut is initiated via a two-hand safety control. Forged knives ...

Trumpf laser and punching machine TruMatic TC 6000 L 1300

• Manufacturer: Trumpf
• Model: Trumatic 6000

Trump Type: TC 6000 L 1300 Laser and punching machine Technical data Mains : 400V/50 Hz Fuse protection: 3 x 100 A Connected load 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm ...

2007 Punching machine Technology S.R.L. Tecnotransfer 1500x3000

Item Description/Artikelbeschreibung: Lot consists of: (1) Punching machine, (1) Palett Position besteht aus: (1) Stanzmaschine, (1) Palette Technical Details/Technische Details: English: Punchine machine barely ...

Hole and punching machine RUHR UND BENDER Mubea KL350

• Manufacturer: Mubea

Machine No.: 0504791315453, tool cabinet 1-door with contents

1985 Sheet Metal Punch TRUMPF Trumatic 235 (9085)

• Manufacturer: Trumpf
• Model: Trumatic 235

Inv.-No.: 179800, max. punching force: 250 kN, with partial grid enclosure, laser protection, rolling cart for dies, 3 tool cabinets multi-row, 1 workbench with a vise, base cabinet 3-row/1-door, with setup, with...

Behr ST 150 Vertical Punching Machine

Behr ST 150 Vertical Shaping Machine - Ram tilt adjustment in both directions: 5 / 8 degrees with - Feeds in X and Y (forward and backward) - Adjustable speed - Manual rotary table adjustment

Punching Machine FINN - POWER A5-25 FB

• Manufacturer: Finn

FINN-POWER A5-25 FB Punching Machine Technical Data Maximum Pressing Force: 23 t (230 kN) Maximum Sheet Thickness: 4 mm X/Y-Axis Feed Rates: 2500/1250 mm Software: JETCAM Tools Brush Table Maximum Hydraulic Press...

Punch-Lasermachine Amada EMLZ 3510 NT (P&F)

• Manufacturer: Amada
• Model: EMLZ

Punch-Lasermaschine Amada EMLZ 3510 NT (P&F) Year: 2008 - Inst. 2010 Working hour: approx. 51000h / 20000h / 9.000h new turbine in 2023/2024 (rest run time: approx. 21.000h) Technical data: Control: AMNC-F ...

1985 SCHENKER KA-1B

• Manufacturer: Schenker
• Model: KA-1B

Info: for office 24/6 staples | Diameter range: 0,2-0,8 mm | Feeding length: 40 mm | Flange length: 6 mm | Working width: 24 mm | Output pieces/min: 1100

Hole punch ST022 #B15947

• Manufacturer: brand

Hole punch used pre-machining table approx. 600 mm 220/380 V The machine was used to punch holes approx. 2 mm in thin sheets. Changes and errors in the technical data, specifications and prices and subject to pri...

NATIONAL 625

• Manufacturer: National
• Model: 625

Diameter range: 16-19 mm | Number of dies: 5 | Number of stations: 6 | Cutting length: 60 mm | Shaft length under head: 70 mm | Output – pieces/min: 70-100

1988 SCHULER GB15-5

• Manufacturer: Schuler

Info: bushing cut-off | Diameter range: 8-18 mm | Number of dies: 5 | Number of stations (incl. cut off): 6 | Shaft length under head: 120 mm | Cutting length: 140 mm | Output – pieces/min: 60-170 | Press power:...

WAFIOS S300

• Manufacturer: Wafios

Diameter range: 4-10 mm | Nail length: 50-300 mm | Output – pieces/min: 150

1965 WAFIOS N100

• Manufacturer: Wafios
• Model: N100

Diameter range: 2,2-3,8 mm | Nail length: 13-104 mm | Output – pieces/min: 430