Used Processing in Ontario, Canada

4,005 Litres jacketed steel tank with mixer mount

-Tank dimensions: 81" tall x 62" diameter -Open top with mixer mount, lid included -Shipping dimensions: Height 105" x Width 65" x Length 65" -legs are 13" tall -3" port on the bottom -Cone bottom -Jacketed -1.5"...

Filter Housing

• Manufacturer: Osmonics

-Shipping dimensions: 15" L x 17" W x 47" H -Cartridge filter housing -Holds three filters

455 Liter Clemmer Liquid Storage Tank

• Manufacturer: Clemmer

-Above ground steel tank for combustible liquids -Double walled -Each wall 2.5 mm thick -Tank dimension: 46.5" L x 29" D -Shipping dimensions(including skid): 54" L x 45" W x 46" H

822 Liter Stainless-steel Holding Tank

-Diameter: 40" -Height: 40" -2" fill and discharge ports -Distance from the ground to the bottom outlet: 13.5" -22" top hatch -Cone bottom -Flange connections -Total dimensions: Height: 69" -Width: 40" -Approxima...

16,365 Liter Proceptor Double Tank Oil/Water Separation System

-Separates oil/grease from water -(2) 3600 IG FRP tanks 10' dia x 9 1/2' straight side 12' overall height 7' 2" internal straight side -Skirted bottom, internal dish center drain to side discharge (6") 2' dome...

500 Liter Jacketed Stainless Steel Mixing Tanks with pneumatic mixers

• Manufacturer: ADM Stainless Inc

-3 Legs at 14" tall -Dome bottom -1" drain on the bottom with shut off valve -Pneumatic Lightnin mixer: model XJA-33 -Half removable lid on top -Jacketed. Max A.W.P 5 PSI at 100 F -Shipping: 79" tall x 42" wide -...

Lightnin Mixer Mod X1P50A

• Manufacturer: Lightnin

-Shipping dimensions: length 10" x width 12" x height 23" Lightnin Mixer: -Model # X1P50A -Serial # R05436288-01 -CW rotation

46,500 Litres Aluminum Insulated Stainless-steel Tank

-146" tall x 122" diameter -Manhole on side is 25" -Flat bottom -Aluminum skin insulated -Tank made of stainless-steel -1" flange on side at bottom -Temperature gage on side at bottom -Flat top -Shipping dimensio...

75,760 Liter Large Steel Tank

-Shipping dimensions: length 290" x width 158" x height 150" -Tank dimensions: length 276" x 146" -Horizontal -Skinned only no insul. -24" diameter man hole -Three side ports: 4.5" diameter, 3.5" diameter and 2" ...

Cone Mixer

• Manufacturer: SEW-Eurodrive

-Cone container with top mount mixer -Steel stand -SEW-EURODRIVE motor: 230/460 V, 60 Hz, 8.60/4.30 amp, 3 HP, 1700 RPM -Rapport ratio: 62.18:1 -Pos. Montage. Mtg: H5

Gardner-Denver Rotary Blower

• Manufacturer: Gardner Denver

-Shipping dimensions: Height - 15" x Width - 18" x Length - 29" -Shaft - 1 1/2" -Output Flange - 10"

2,921 Litres stainless steel jacketed tank

• Manufacturer: Tri-Canada

-Dome bottom -Port on bottom is 2" -Stationary legs 20" tall -Man whole on top is 20" wide -Temperature gage on side -Tank dimensions 61" diameter x 61" tall -Shipping dimensions: Height 103" x Width 74" x Length...

500 Liter Jacketed Stainless Steel Mixing Tank w/ pneumatic mixers

• Manufacturer: ADM Stainless Inc

-3 Legs at 14" tall -Dome bottom -1" drain on the bottom with shut off valve -Pneumatic Lightnin mixer: model XJA-33 -Half removable lid on top -Jacketed. Max A.W.P 5 PSI at 100 F -Shipping: 79" tall x 42" wide -...

Nella Impulse Sealer KS-300

• Manufacturer: Nella

-Shipping dimensions: Height - 11" x Width - 18" x Length - 4" -Source: AC 110V / 60Hz

Fil-trek filtration double sock

• Manufacturer: FIL-TREK

-MAWP: 150 PSI @ 400 F -MDMT: -50 F @ 150 PSI -Model: S6SLDV211-2P-V1-150 -Isolation valves -On stationary legs