- Trusted Seller
GEKA PUMA 80 S
- Manufacturer: Geka
- Model: Puma 80
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Stroke: 70mm | Work height max.: 1094mm | Throat: 500mm | No. of strokes: 20Hub/min | E...
Günzburg, Germany - Trusted Seller
GEKA PUMA 110 S
- Manufacturer: Geka
- Model: Puma 110
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 110t | Throat: 500mm | Engine output: 9kW | No. of strokes: 28Hub/min | Strok...
Günzburg, Germany - Trusted Seller
Emskirchen, Germany - Trusted Seller
1997 Schmedt PräCut Typ 65
- Manufacturer: Schmedt
Abstanz- und Einkerbmaschine / Cutting and Notching machine Schmedt PräCut 65 Baujahr / Year 1997 - Serial-No. 79 Book block height: up to 350 mm Book block thickness: up to 90 mm Air supply: 10 bar Power supply:...
Emskirchen, Germany - Trusted Seller
1993 MAKA VHP180
- Manufacturer: Maka
mobile spindle Working width: 180 mm | Working height: 120 mm | Work waves: 4 | Spindle arrangement: bottom, right, left, top | Motor power lower shaft: approx. 5.5 kW | Motor power shaft right: approx. 5.5 kW | ...
Egenhofen, Germany 
2021 MTE FBF-S7000
- Manufacturer: MTE
MTE FBF-S7000 cross-slide milling machine: Control: HDH TNC640 HSCI Travel: X- 7,000 mm Y- 1.300 mm Z- 1,500 mm Clamping surface: Length: 6000 mm Width: 1100 mm Height: 850 mm Automatic milling head: d...
Nördlingen, Germany
2008 Deckel Maho DMC60U duoblock
- Manufacturer: Deckel / Maho
- Model: DMC 60 U DUOBLOCK
5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time...
Nördlingen, Germany
2011 Deckel Maho DMU50ecoline
- Manufacturer: Deckel / Maho
- Model: DMU 50 ECOLINE
Very good condition! Control: Siemens 810D Shopmill | Spindle speed: max. 8,000 rpm | Spindle mount: SK40 | Tool magazine: 16 seats | Travel: X-500 mm, Y-450 mm, Z-400 mm | Swivel rotary table : -5 / +110
Nördlingen, Germany- Trusted Seller
Ostheim F80
- Manufacturer: Ostheim
Blockrückenfräse (Einkerbmaschine) - Block Back Cutter and Notching machine
Emskirchen, Germany - Trusted Seller
ELUMATEC AS 70
- Manufacturer: Elumatec
- Model: AS70
Control: conventional - | Storage location: Location | Freight basis: Delivery ex location. | Speed: 12000rpm. | Weight of the machine approx.: kg | Number of milling agregates: St. | Motor output: kW
Günzburg, Germany - Trusted Seller
GEKA PUMA 55 SD
- Manufacturer: Geka
- Model: Puma 55
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 55t | Hole diameter in sheet thickness: Ø 40 in 10mm | Throat: 750mm | Stroke...
Günzburg, Germany - Trusted Seller
GEKA PUMA 55 S
- Manufacturer: Geka
- Model: Puma 55
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 55t | Hole diameter in sheet thickness: Ø 40 in 10mm | Throat: 500mm | Stroke...
Günzburg, Germany - Trusted Seller
1969 WILHELM SIMON L15
- Manufacturer: Simon
- Model: L15
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Rotary table dia.: mm | Max. slide. of grinding wheel: mm | With manual ongoing: 0 | Manually feed: 0
Günzburg, Germany 
2018 Doosan DNM4500
- Manufacturer: Doosan
- Model: DNM 4500
As good as new DOOSAN DNM4500 including tool holders
Nördlingen, Germany
2004 Hurco VM2
- Manufacturer: Hurco
- Model: VM2
Hurco VM2 Very good condition! Table size: 1170 x 508 mm - Maximum table load: 544 kg - Movement in X/Y/Z: 1020 x 457 x 457 mm - Main spindle speed: 8000 rpm - Main spindle taper: SK40 - Main drive power: ...
Nördlingen, Germany
Tip: Enter manufacturer, model or keyword
