Used Drilling Rigs

1994 INGERSOLL RAND A300 AUGER DRILL RIG #7309Tb

• Manufacturer: Ingersoll Rand

Manufactured 1994, approx 9000 hours, mounted on 2007 International 4300 truck with approx 98,500 miles, 2 winches, 3L6 Moyno pump, slide base with cross slide head, probe hammer, cathead, toolboxes, under deck a...

2019 RTDrill RTD28 CRAWLER DRILL RIG #1595Tb

Manufactured 2019, approx. 2850 hours, 750/350 air, Cat C13 Tier IV engine, rod changer, dust collector Price on Request

REEDRILL TAURUS XL DRILL RIG #10089T

• Manufacturer: Taurus
• Model: XL
• Gearbox type: Automatic
• Drilling depth: 24.384 meter

Built in 1990’s, track mounted, 80’ depth, 120” max bit diameter, 10” inner kelly bar, 12” outer kelly bar, Cummins engine, automatic transmission, 25,000 lb service winch, 280 degree extendable table, 144,000 ft...

2014 INGERSOLL RAND T3W DRILL RIG #3363T

• Manufacturer: Ingersoll Rand
• Model: T3W
• Horsepower: 565 horsepower
• Hook load: 0.907184 tonne

Manufactured 2014, 1070/350 IR air compressor, approx. 3,300 original hours as of August 1, 2024, Cummins QSK15 deck engine, 40,000# pullback, hydraulic tensioning system, 25 gpm Bean water pump, mounted on 2015 ...

2005 INGERSOLL_RAND ECM 370

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

SIMCO 5000TR TRACK MOUNTED DRILL RIG #3400T

• Manufacturer: Simco

Cat D4 carrier on metal tracks, 10-ton carrier winch, Duetz 6 cylinder diesel engine, two winches, breakout hydraulic wrench, 2-speed rotary power head, small mud pump Price on Request

ARDCO TOP DRIVE TRUCK MOUNTED DRILL RIG #10465T

Mission 4 x 3 centrifugal pump, Deutz air cooled 4 cylinder deck engine, mounted on 2003 Ford F650 truck with Ford diesel engine, tires like new built on a Failing body, 300' depth capacity, 200' pipe, been sitti...

REICHDRILL C450 D11 CRAWER MOUNTED DRILL RIG #8193T

Built early 2000’s and recently rebuilt, 900/500 air compressor, Cat deck engine (2400 hours), 6500 frame hours, 75% undercarriage, 8.5’W x 11’H, Contact us for additionaldetailsof the rebuild PRICE: $370,000 REI...

2024 LTD 360 RHINO CABLE TOOL DRILL RIG #10685T

• Manufacturer: Rhino

Built 2024, includes 4” x 14’ drill stem, 500’ x 5/8” main line, 5” x 12’ bailer (new), 6” and 10” bits (new), hydraulic controls, auto feed for mainline Price: $95,000

2012 #EDM 2000 SLIDING ANGLE MAST DRILL RIG 7472Td

Year 2012, mounted on 2012 International 7600 8x4 truck, Set up for exploration drilling (5-150 rpm tophead in low gear) AND core drilling applications (150-1,500 rpm tophead in high gear), Max tophead torque 9,0...

1996 TOYO TCD928C

• Manufacturer: Toyo

2.5 – 3.5 Inch Class TOYO TH800C Hydraulic Drifter Powered By DEUTZ BF6L913 Diesel Engine This is a Mazda Toyo TCD918E Self Contained Hydraulic Drill Extendable Boom Onboard Sullivan air compressor – 160 CFM @ 15...

1998 REEDRILL 300

• Manufacturer: Reedrill

3.5” – 4.5” Inch Class CAT 3126 Diesel Engine Self-Contained Hydraulic Drill HPR1H Hydraulic Drifter New Injection Pump 2017 Handles a 20’ft starter steel Set up for T45 Low frame Hours Extendable Boom Dust Colle...

SOOSAN JD1400E

• Manufacturer: Soosan

2017 Year – Junjin Soosan JD1400E serial # 67 – Rock Commander Unit has approx.. 6,552 total hours & 2,123 percussion hours.YH135 Drifter, 400 CFM @ 150 PSI onboard GHH-Rand Air Compressor, Rod Changer, Dust Coll...

FAILING 1500 DRILL RIG #2826T

• Manufacturer: Failing
• Model: 1500
• Gearbox type: Manual
• Mast Height: 0.9398 meter

FAILING 1500 DRILL RIG

1990 CANTERRA CT-350 AUGER DRILL RIG #2596T

Manufactured 1990, auger has updated hydraulic pump for controls, long tower, 3 winches, including jib winch, sandline with rapid reverse (used to drive pipe into ground), 10,000 lb torque tophead, drillers platf...

Atlas-Copco DML-LP Drilling Rig

• Manufacturer: Atlas-Copco
• Model: DML-LP

Good condition Atlas-Copco DML-LP Drilling Rigs manufactured in 2004. Located in USA and other countries. Click request price for more information.