2003 Okawara Kakoki L-8
- Manufacturer: 大川原化工機
Moisture evaporation capacity: 3kg/h Hot air inlet temperature: 250°C, exhaust air outlet temperature: 100°C Disk atomization, parallel flow method Atomizer model: OCA-008B Collection method: Single point collect...
Hiroshima, Japan![1992 [Oe Kogyo] Cooker conditioner](https://i.machinio.com/thumb/96vas/2797152697/ddf6/1992-oe-kogyo-cooker-conditioner.jpg)
1992 [Oe Kogyo] Cooker conditioner
- Manufacturer: 大江工業
Paddle type Internal volume: 1.1㎥ Design pressure: 0.2kg / cm2 Design temperature: 200 ℃ With supply conveyor (3.7kw)
Hiroshima, Japan
2011 Izumi Environmental Engineering Vertical
- Manufacturer: Izumi
Tube: 25.4φ (2t) x 3000L x 165 tubes (SUS304) Body plate: 500φ (SGP-E)
Hiroshima, Japan
1986 Tanabe Wiltech Z32-SL-V-HP
- Manufacturer: タナベウィルテック
5000rpm/4400G Nominal capacity: 3-5m3/h Variable impeller type Pole change motor
Hiroshima, Japan
Tanabe Wiltec TOP-48-80
- Manufacturer: タナベウィルテック
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 800G Scraping device air-driven With control panel (without regenerative resistor)
Hiroshima, Japan![[TANABE WILTECH] Basket type centrifuge](https://i.machinio.com/thumb/96vas/641854457/ddf6/tanabe-wiltech-basket-type-centrifuge-55inch.jpg)
[TANABE WILTECH] Basket type centrifuge 55inch
- Manufacturer: タナベウィルテック
Fully automatic bottom discharge type. Hydraulic drive for scraper. Low speed motor 2.2Kw 200V. No nameplate.
Hiroshima, Japan
2002 Morimatsu Industrial Square Type
- Manufacturer: 森松工業
Panel tank with coin filling machine Tank 1000 × 2500 × 2000H + coin filling machine Total length 4000
Hiroshima, Japan
Hiroshima, Japan
1989 Tanabe Wiltech Z32SL-3LV
- Manufacturer: タナベウィルテック
Three-layer decanter 5000rpm/4400G Nominal capacity: 3-5m3/h Variable impeller type Pole change motor
Hiroshima, Japan
Tomoe Engineering P-3000
- Manufacturer: 巴工業
No spare ball gearbox for decanter Material: SUS | Quantity saved: Two
Hiroshima, Japan
1984 Westfalia SA45
- Manufacturer: ウエストファリア
- Model: SA
30kw (motor not pictured but available separately). 4950rpm
Hiroshima, Japan
2002 Tamagawa Machinery TC-3.5S
- Manufacturer: 玉川マシナリー
Internal volume: 4.6 m3 Heat transfer area: 62.6 m² Design temperature: 165 ° C Rotation speed: 1.36 to 5.33 rpm Type 2 pressure vessel
Hiroshima, Japan
Suiko PP tank
- Manufacturer: スイコー
MC-3000 Enclosed round tank Drawings available Material: PE | Quantity saved: One | Size: External dimensions: φ1625 x 2080H
Hiroshima, Japan
1996 Iwai Machine GHX
- Manufacturer: Iwai Machinery
Plate material: SUS316 Heat transfer area: 85.8m2 Flow rate: 100m3/h(MAX) Heat resistance: 150°C Number of Plates：CH①62 CH②42 CH③30
Hiroshima, Japan
1997 Izumi Food Machinery NB36SS-163-6-HWW
- Manufacturer: Izumi
Plate material: SUS316 Heat transfer area: 56.52m2 13500L/h Number of plates: CH①77, CH②72, CH③14
Hiroshima, Japan
Tip: Enter manufacturer, model or keyword