Used Machine Tools

58" X 26" ALPHA-MAGNETS “AC2000SD” MAGNETIC CHUCK w/SD CONTROLLER - 19 SUPPORT BLOCKS

58" X 26" ALPHA-MAGNETS MAGNETIC CHUCK WITH CONTROLLER SERIAL NO 08G03.01, MODEL AC2000SD EQIPPED WITH: SD CONTROLLER (18) SUPPORT BLOCKS (3-ROWS OF 6) SPECIFICATIONS: Magnet, Length 58" Magnet, Width 26"

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & TAPPED ANGLE PLATE w/ADJUSTABLE EXTENSIONS

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & SLOTTED ANGLE-PLATE EQUIPPED WITH: (6) Slots On Face - (1) Slot On Top Threaded Mounting Holes Face & Top (4) Adjustable Mounting Arm Extensions (6) Eyebolts GENERAL SPEC...

2-1/2" X 10' (120”) SPEGO "506-20” TURNMATIC 5-SPINDLE HYDRAULIC BAR-FEED w/SELF-CONTAINED HYDRAULICS - (2) HEAVY-DUTY SUPPORT STANDS

• Manufacturer: Spego

2-1/2" SPEGO "TURNAMIC 506" 5-SPINDLE BAR-FEED Serial No 96-06-481, Model 506-20 EQUIPPED WITH: Hand And Auto Controls Forward And Reverse Controls Self Contained Hydraulic System (2) Heavy-Duty Support Stands CA...

1980 13” X 0.118” PARX (JOHANN KUNZ SOHNE) “KSM/1” HEAVY-DUTY SLANT-BED ROTARY CIRCLE SHEAR w/PNEUMATIC SWIVELING CIRCLE GUIDE - 30” THROAT

#KSM/1 PARX (JOHANN KUNZ SOHNE) HEAVY-DUTY SLANT-BED ROTARY CIRCLE SHEAR NEW 1980, SERIAL NO 35/80, FABR NO 4005, MODEL KSM/1 Imperial Metric EQUIPPED WITH: SLANT-BED DESIGN PNEUMATIC SWIVELING CLAMP CIRCLE CUTTI...

NAPA Echlin Storage Cabinet

NAPA Echlin Storage Cabinet Lighter-weight metal Supply wire is cut off light under top cabinet Missing a screw on NAPA handle on bottom section (easily replaceable) Wing nuts holding sections together - should d...

Ball Bearing V-Block & V-Block w/ Work Holding Devise

Ball Bearing V-Block & V-Block w/ Work Holding Devise

Box w/ Hammers, Punches, Wrenches

Box w/ Hammers, Punches, Wrenches

Dayton 6" Buffer, Model 4TJ99A, 1/2-HP, 3450 RPM, 120/240 V

• Manufacturer: Dayton

Dayton 6" Buffer, Model 4TJ99A, 1/2-HP, 3450 RPM, 120/240 V

"NELMOR" ABS GRINDER

• Manufacturer: Nelmor

"NELMOR" ABS GRINDER MAKE- NELMOR MODEL#- UNKNOWN SN- UNKNOWN UL LISTED ELECTRICAL INFORMATION 120V, 60 PH, 60 HZ HARD WIRE REQUIRED APPROXIMATELY DIMENSIONS 64"H x 20"W x 36"D (OVERALL) 24H" x 16"W x 16"D (OVEN ...

Assorted Cutting Tools

Location Dale, TX Lot # 63 System ID # 4565464 End Date Central Standard Time Start Date Central Standard Time Item # 4565465 Assorted Cutting Tools : Carbide End Mills, Drills, Radius Cutters, Reamers, Flange Cu...

Rolling Tool Cabinet with Tools / Contents

Rolling Tool Cabinet with Tools / Contents

Aluminum Fabricated Product toolbox

Aluminum Fabricated Product toolbox. Great shape; sold as is.

20" X 59" WALKER - HAGOU B.V. "46" ELECTRO-MAGNETIC CHUCK

• Manufacturer: Walker
• Model: 46

19 5" X 59" WALKER-HAGOU B.V. ELECTRO-MAGNETIC CHUCK SERIAL # EG2699 MODEL 46

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26784 AND 26785 ALSO.

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26783 AND 26784 ALSO.