![Precision Surface Grinder [overhaul machine]](https://i.machinio.com/thumb/e15bb116dea898bcedf3138373c3ee70/original_compressed-refurbished-precision-surface-grinder-overhaul-machine/ddf6/precision-surface-grinder-overhaul-machine.jpg)
Precision Surface Grinder [overhaul machine]
refurbished
- Manufacturer: Okamoto
- Model: PSG-52
[Overhaul machine] ◆Whetstone: Outer diameter 205 x Thickness 19 x Hole diameter 50.8mm ◆Whetstone no-load rotation speed: (50/60Hz) 3000/3600rpm ◆200/220V ◆50/60Hz ※Whetstone rotation inverter stepless cont...
Mie, Japan
Diapet DP-620
used
- Manufacturer: Diapet
- Weight: 450kg
â—† Tool length (Ball end mill) Total length 235 / (End mill) 300
Mie, Japan
Nagase SGH-600
used
- Manufacturer: Nagase
- Weight: 1.5 ton
Motor 2.2 kW + 1.5 kW + 40 W; 9.8 A + 6.3 A + 0.23 A Electricity 220 V 3 Phase 0.005 Per Up Down Division 0.05 Per Cross Division
Mie, Japan
1974 Kuroda GS-BM
used
- Manufacturer: Kuroda
- Model: GS-BM
◆ Tiltable permanent magnet chuck GSM-2 ・ 100 × 300 ◆ With dust collector ◆grindstone shaft speed 2800rpm
Mie, Japan
Brown & Sharpe 612 Micromaster
used
- Manufacturer: Brown & Sharpe
- Model: Micromaster
—† table: 350 X 100
Mie, Japan
1995 KENT KGS-410AHD
used
- Manufacturer: Kent
- Model: KGS-410AHD
- Weight: 3800kg
â—†With magnetic separator â—†full automatic —† table work surface: 1060 × 410 | —† table size: 3020 × 504 | —† grindable area: 1050 × 420 | —† wheel axis rotation speed (60hz): 1740rpm | —† wheel dimensi...
Mie, Japan
1996 Hitachi GHL-B409NS
used
- Manufacturer: Hitachi
- Model: GHL-B409NS
- Weight: 3800kg
—† table work surface: 900 × 400 | —† wheel axis rotation speed (60hz): 1800rpm | —† machine body weight: 3800kg
Mie, Japan
1977 NICCO NSG-550B
used
- Manufacturer: NICCO
- Weight: 80kg
â—† Rotation speed (50Hz) 2,800rpm / (60Hz) 3,400rpm â—† Grinding wheel: Diameter 180 x Thickness 6-32 x Hole diameter: 31.75mm
Mie, Japan
1985 Kuroda GS-CHA
used
- Manufacturer: Kuroda
- Weight: 1500kg
â—† XY: Hydraulic feed Z: Automatic cutting —† rated voltage: AC200V | —† table dimensions: 550 × 200 | —† chuck dimensions (flat type): 500 × 200 × 90mm | —† no-load rotation speed: 1800m / min | —† whe...
Mie, Japan
1997 Okamoto PSG-52DX
used
- Manufacturer: Okamoto
- Model: PSG-52
â—† FX power supply, spindle rotating inverter, overhead dress, front and rear axis digital
Mie, Japan
1977 Nagase SGW-4
used
- Manufacturer: Nagase
â—† Stroke (X, Y, Z): S: X470, Y270 —† rated voltage: AC200V | —† table dimensions: 450 x 200 | —† chuck dimensions (flat type): 450 x 150 | —† notch specifications: XY automatic | —† with or without dresser...
Mie, Japan
1985 Toyoda GUP32×50
used
- Manufacturer: Toyoda
- Model: GUP3250
- Weight: 2,900kg
â—† MT No.4 —† swing on the table: 320 | —† distance between centers: 500 | —† whetstone: Outer diameter φ355 x Width 50 x Inner diameter φ127 | —† spindle rotation speed: 16-500rpm | —† required floor are...
Mie, Japan
1973 Toyoda GUS-30-50
used
- Manufacturer: Toyoda
- Weight: 2,200kg
—†swing: 300 | —† center distance: 500 | —†maximum grinding diameter: 280 | —†wheel size: 355 x 50 width x 127 inside diameter | —†center: MT No.4 | —† spindle hole diameter: 27mm | —† spindle speed: 20 ~...
Mie, Japan
1971 Mizuguchi GU-650
used
- Manufacturer: Mizuguchi
â—† Rated voltage 200V —† no-load rotation speed: 1750min-1 | —† whetstone dimensions: outer diameter 355φ x width 75 x inner diameter 152.4φ
Mie, Japan
Tip: Enter manufacturer, model or keyword