Used spm

14 Ga x 10' Roto-Die 15

Includes 24" Manual Backgauge, 90 Deg. Hemming Punch (damaged), Bottom Roto die, Single Station Depth of Stroke Adjustment, (6) Sheet Supports, Corded cable Foot Switch. Model 15, 24" Manual Backgauge, Stroke Adj...

120 TON PIRANHA SINGLE END PUNCH 12081B

• Manufacturer: Piranha
• Model: SEP

MODEL: SEP-120 SERIAL #: SEP120-145 120 TON PUNCH 1-1/2" HOLE THROUGH 1" MAXIMUM MATERIAL 5" MAXIMUM HOLE THROUGH 1/4" MATERIAL 2" STROKE 21.5" THROAT DEPTH 12-1/4" OPEN HEIGHT 10-1/4" CLOSED HEIGHT WITHOUT DIE...

PIRANHA SEP-120

• Manufacturer: Piranha
• Model: SEP

PIRANHA (NEW) MODEL SEP-120 SINGLE-END PUNCH PRESS 21-1/2" THROAT 12-1/4" OPEN HEIGHT 10-1/4" CLOSED HEIGHT WITHOUT DIE BLOCK 2" STROKE 20" X 10" PLATEN TABLE PUNCH - 120 TON CAPACITY - 1-1/2" DIAMETER HOLE THROU...

PIRANHA P-50

• Manufacturer: Piranha
• Model: P-50

PIRANHA (NEW) MODEL P-50 SINGLE OPERATOR IRONWORKER 5" THROAT 11-1/2" OPEN HEIGHT 7-3/4" CLOSED HEIGHT WITHOUT DIE BLOCK 3-3/4" STROKE 8" X 16" PLATEN TABLE PUNCH - 50 TON CAPACITY - 13/16" DIAMETER HOLE THROUGH ...

PIRANHA P-110

• Manufacturer: Piranha
• Model: P-110

PIRANHA (NEW) MODEL P-110 SINGLE-OPERATOR IRONWORKER 12" THROAT DEPTH 15-1/2" OPEN HEIGHT 10-1/4" CLOSED HEIGHT WITHOUT DIE BLOCK 5-1/4" STROKE LENGTH 14-1/2" X 21" PLATEN TABLE SIZE PUNCH - 110 TON CAPACITY - 1-...

05 PRESSES WITH DOUBLE SIDE MOVING TABLE, HYDRAULIC CLUTCH-BRAKE ORTLINGHAUS product code: 33478

Hurry! This product has already been viewed 361 times! Don't miss out! 5 PRESSES AVAILABLE WITH DOUBLE SIDE-MOVING TABLES, ORTLINGHAUS HYDRAULIC CLUTCH-BRAKES WEINARTEN 1000-TON LINK DRIVE CAPACITY AT 20 mm FROM ...

PIRANHA P-90

• Manufacturer: Piranha
• Model: P-90

PIRANHA (NEW) MODEL P-90 SINGLE-OPERATOR IRONWORKER 10" THROAT DEPTH 15" OPEN HEIGHT 10-1/8" CLOSED HEIGHT WITHOUT DIE BLOCK 4-7/8" STROKE LENGTH 12" X 21" PLATEN TABLE SIZE PUNCH - 90 TON CAPACITY - 1-1/8" DIAME...

Dimeco Microfeed 1125-D Simo Star

• Manufacturer: Dimeco

Microfeed unit Type: 1125-D - max width: 510 mm - max thickness: 6,35 mm - max thickness for max width: 5,5 mm - max cross section area sq mm2: 2800 - diameter of rolls: 125 mm - max speed: 120 m/min - max feed c...

1977 PLATARG 611 Ref No: 43685

• Manufacturer: PLATARG

A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...

1969 PLATARG 312 Ref No: 40583

• Manufacturer: PLATARG

This machine can have the following installed/added to it (not included) o new lubrication o new electrical installation o new protections o CE conformity Number of station 13 (12+1). Capacity on any one station ...

PIRANHA 50-TON SINGLE-OPERATED IRONWORKER

• Manufacturer: Piranha
• Model: P-50

HOLE SIZE (MAX MATERIAL) 13/16" THRU 3/4" PLATE MAX HOLE SIZE (MATERIAL) 3" THRU 3/16" PLATE 30 SPM @ 1/2" ON PUNCH END 1/2" X 10" 3/8" X 12" 1/4" X 13" 3-1/2" X 3-1/2" X 5/16" 2-1/4" X 3" THRU 1/4" PLATE OTHER O...

2000 tons Press Transfer Mechanical Verson TL-SE4-2000

• Manufacturer: Verson
• Model: TL-SE4-2000

Capacity : 2000 tons, Stroke : 75 mm, Stroke per minutes : 12 to 24 Shut height: 1500 mm, Bed size: 5400 x 2700 mm, Die space :6000 x 2700 mm Rating: ½” BDC Bolster Size: 5400 x 2700 mm Micro-inch through...

600 tons Blanking Line Schuler EBS4-600-3,6-550

• Manufacturer: Schuler

Capacity : 600 tons, Ram stroke : 400 mm, Ram adjustment : 350 mm, Shut height (stroke down, adjustment up) : 1200 mm, Table surface area ca : 3600 x 2500 mm, Ram surface area ca. : 3600 x 2500 mm, Side ope...

Sheet Stamping Line Mechanical Dongshin 600T-400T-300T-300T

• Manufacturer: Dongshin

Tendem Line for DONGSHIN 600T-400T-300T-300T Tandem Line 1) Header / Dongshin New 2006 DCLP600 Ton 2) Ssangyong DA400 Ton 3) Dongshin DCLP300 Ton 4) Donshin DCLP300 Ton With Moving Bolstert + Robot 1) Dong...

650 tons Press Fineblanking Hydraulic Mori FB-650-FDE

• Manufacturer: Mori

Capacity : 650 tons, Stroke Length : 30–100 mm, During operation; maximum slide stroke up to 200 mm V-Ring Force : 3200 kN, Counter Force : 1300 kN, Cutter Force : 300 kN, Speed : 30 spm, Cutting Speed : 3...