Used cas

1960 STÖLTING RA

• Manufacturer: STÖLTING
• Power requirement: 4 kW

Mechanical 3-roll plate bending machine Operation: Hand switch / foot switch forward/backward 2x EMERGENCY button

1986 VEB ELEKTROTECH.GERAETE 4 F - 6150

• Manufacturer: VEB ELEKTROTECH.GERAETE
• Power requirement: 1.5 kW

Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/...

1981 Strojarne Piesok XZP 100/12

• Manufacturer: ESPE/Piesok
• Model: XZP 10012
• Power requirement: 15.1 kW

The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjuste...

Weingarten UZH 80

• Manufacturer: Weingarten

This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 p...

1974 RASTER HR 30 SL

• Manufacturer: Raster
• Model: HR 30 SL
• Power requirement: 7.5 kW

Automatic punching press 4 columns mechanical with feed unit with control panel passage widths: Column opening front=350mm and side=258mm

1991 HEIDEL MB W 140 OP 4

• Manufacturer: HEIDEL
• Power requirement: 25 kW

CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upp...

1985 KAISER V 40

• Manufacturer: Kaiser
• Power requirement: 15.2 kW

40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic

1970 straightening machine DDR BETRIEB nicht bekannt

• Manufacturer: DDR BETRIEB
• Power requirement: 1.2 kW

straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D.

1980 NICHT BEKANNT 23N/8

• Manufacturer: NICHT BEKANNT

Punching Press Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Punching cross section in mm²: 45 kp/mm² | Table-size: 120x100 mm | Throat: 80 mm | Weight...

Feed units VG 400

Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described.

1988 WMW -

• Manufacturer: WMW
• Power requirement: 0.25 kW

-application: bending of beads / flanging -shaft distance max./min.: 65 / 52mm manually adjustable via handwheel -currently beading tool Ø 8mm built in -stop plate 130mm adjustable operation at the control box an...

1979 ECKOLD MZ 10

• Manufacturer: Eckold
• Model: MZ 10

Additional Information Used mobile former, equipped with an MZ 10 clamping tool, built in 1979, and a hydraulic power pack, type HA 400, serial no. 93/563, 550 bar, for use in folding and smoothing. Accessories C...

1990 ANTRIM HYDRAULICS Embosing Press

• Manufacturer: ANTRIM HYDRAULICS
• Power requirement: 12 kW

Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x3...

TEHAG DB 6000 H

• Manufacturer: TEHAG

Addition Used, well-maintained welding turntable, hydraulically height-adjustable and tiltable table. Further information Thanks to the high-positioned rotation axis, it can accommodate workpiece diameters up to ...