Machine Tools » Sheet Metal Processing » Switzerland

Building Filters

108

Used Sheet Metal Processing in Switzerland

  • Trusted Seller
    2025 PLATARG 312 HS Ref

    2025 PLATARG 312 HS Ref No: 48610

    • Manufacturer: PLATARG

    Object: 48610 | Controls: BECKHOFF | Number of slide actions: 13 | Slide force: 3 to | Stroke: 60 mm | Stroke rate (max.): 210 /min | Slide adjustment: 6 mm | Variable speed: yes | Stroke rate (min.): 70 /m...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1971 PLATARG 611 Ref No:

    1971 PLATARG 611 Ref No: 41435

    • Manufacturer: PLATARG

    Platarg transfer press 611 Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1987 PLATARG 912 Ref No:

    1987 PLATARG 912 Ref No: 46450

    • Manufacturer: PLATARG

    The press is now in storage - was in a full running state when taken out of service. High lift stroke cams 159 mm - max. shell height 76 mm 13 Stations, 12 Rams + 1 Slave Wedge Adjustable Rams with Standard Male ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1977 PLATARG 611 Ref No:

    1977 PLATARG 611 Ref No: 43685

    • Manufacturer: PLATARG

    A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1969 PLATARG 312 Ref No:

    1969 PLATARG 312 Ref No: 40583

    • Manufacturer: PLATARG

    This machine can have the following installed/added to it (not included) o new lubrication o new electrical installation o new protections o CE conformity Number of station 13 (12+1). Capacity on any one station ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1970 FEINTOOL GKP F 100/160

    1970 FEINTOOL GKP F 100/160 Ref No: 38727

    • Manufacturer: FEINTOOL

    The press can currently not be inspected in operation Reconstruction of the complete mechanical system and the hydraulic system. New electrical panel. Servomotor in the feeder. All in 2017.

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1971 FEINTOOL GKP F 50/80

    1971 FEINTOOL GKP F 50/80 Ref No: 43700

    • Manufacturer: FEINTOOL

    Info to the Press - good mechanical condition - incl. servo feeders - frequency converter for the main drive motor, i.e. infinitely variable speed - CE

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2001 FEINTOOL HLT 1250 Ref

    2001 FEINTOOL HLT 1250 Ref No: 44927

    • Manufacturer: FEINTOOL

    Long table fineblanking press, specifically useful for progressive/transfer operations The press was only used rarely. Hours of operation: 4'682 Stroke count: 1.2 Mio

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 ARKU RM 50X/9 ECOPLAN

    2005 ARKU RM 50X/9 ECOPLAN Ref No: 46236

    • Manufacturer: Arku

    Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2008 MÜLLER PMLE 250 X

    2008 MÜLLER PMLE 250 X 2000 R-HK Ref No: 50719

    • Manufacturer: Muller

    Machine hours: 20,391 h (operating hours) Adjustment strokes: 20, 39, 69, 99, 125, 148, 165, 175, 180 mm Equipment: - External connecting rods for high tilt stability - Hydraulic overload protection - Press force...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1985 PLATARG 712 Ref No:

    1985 PLATARG 712 Ref No: 43759

    • Manufacturer: PLATARG

    Technical details of the machine below: - Stations 12 - Station distance 82.55 mm - max. strip width 90 mm - max. strip thickness 1.63 mm - max. blank diameter 52 mm (standard) 44 mm (zig-zag) - min. blank diamet...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1970 FEINTOOL GKP 50/80 Ref

    1970 FEINTOOL GKP 50/80 Ref No: 56413

    • Manufacturer: FEINTOOL

    Object: 56413 | Total force (nominal): 80 to | Stroke rate (max.): 72 /min | Lower table (left-right): 470 mm | Lower table (front-back): 420 mm | Upper table (left-right): 400 mm | Upper table (front-back)...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1983 FEINTOOL GKP 160 Ref

    1983 FEINTOOL GKP 160 Ref No: 46191

    • Manufacturer: FEINTOOL

    The press, including the straightening line, is still in operation and can be inspected under power The machine was mechanically overhauled in 2016 ( articulation). Since then, the machine has made 27,538,408 str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1995 FEINTOOL MFA 2500 Ref

    1995 FEINTOOL MFA 2500 Ref No: 46188

    • Manufacturer: FEINTOOL

    Can be inspect in running condition Object: 46188 | Controls: HARDMEIER CONTROL | Drive system: knuckle-joint | Feedstock transport direction: right to left | Total force (nominal): 250 to | Stroke: 67 mm | Str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2006 FEINTOOL GKP-100 Ref No:

    2006 FEINTOOL GKP-100 Ref No: 55176

    • Manufacturer: FEINTOOL

    Approx. 79 million strokes Object: 55176 | Last overhaul: 2006 | Quick die change system: yes | Total force (nominal): 100 to | Stroke: 20 mm | Stroke rate (max.): 80 /min | Lower table (left-right): 430 mm |...

    Niederhelfenschwil, Switzerland
34567

Overview

Sheet metal processing involves the cutting, bending, and assembling of sheet metal to create different products and structures. This category includes machinery such as presses, shears, lasers, and CNC machines, all designed to handle various types of metal sheets for industries like automotive, aerospace, and construction.

FAQ

What should I consider when buying used sheet metal processing equipment?

Check the machine's age, condition, and maintenance history. Verify its compatibility with your specific metal types and thicknesses, as well as its operational accuracy and efficiency.

How can I ensure safe shipping of sheet metal processing equipment?

Hire a specialized heavy machinery transport service. Ensure the equipment is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for sheet metal processing equipment?

Regular maintenance includes inspecting and lubricating moving parts, checking electrical systems, and cleaning to prevent dust buildup. Refer to the manufacturer's manual for specific maintenance intervals and procedures.