Machine Tools » Sheet Metal Processing » Saxony

Search By Manufacturer

Building Filters

19

Used sheet rolling machine in Saxony, Germany

  • Trusted Seller
    1970 straightening machine DDR BETRIEB nicht

    1970 straightening machine DDR BETRIEB nicht bekannt

    • Manufacturer: DDR BETRIEB
    • Power requirement: 1.2 kW

    straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D.

    Leipzig, Germany
  • Trusted Seller
    1988 WMW -

    1988 WMW -

    • Manufacturer: WMW
    • Power requirement: 0.25 kW

    -application: bending of beads / flanging -shaft distance max./min.: 65 / 52mm manually adjustable via handwheel -currently beading tool Ø 8mm built in -stop plate 130mm adjustable operation at the control box an...

    Leipzig, Germany
  • Trusted Seller
    1960 STÖLTING RA

    1960 STÖLTING RA

    • Manufacturer: STÖLTING
    • Power requirement: 4 kW

    Mechanical 3-roll plate bending machine Operation: Hand switch / foot switch forward/backward 2x EMERGENCY button

    Leipzig, Germany
  • Trusted Seller
    WMW WBB 2300

    WMW WBB 2300

    • Manufacturer: WMW
    • Power requirement: 9 kW

    Steel frame double T beam welded top roller: with running; adjustment= length 150mm via hand toggle; support block can be folded out for opening side rollers: motor driven; adjustment=fixed

    Leipzig, Germany
  • Trusted Seller
    1991 SCHÄFER SRMVHY

    1991 SCHÄFER SRMVHY

    • Manufacturer: SCHÄFER

    free loaded on truck sheet width 3000 mm plate thickness 16 mm pre-bending / weight of the machine ca. 15 t dimensions of the machine ca. m

    Eilenburg, Germany
  • Trusted Seller
    Weingarten UZH 80

    Weingarten UZH 80

    • Manufacturer: Weingarten

    This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 p...

    Leipzig, Germany
  • Trusted Seller
    1987 WMW-BLEMA UBR 10 x

    1987 WMW-BLEMA UBR 10 x 2000/ 1-16

    • Manufacturer: Blema

    free loaded on truck plate width 2000 mm plate thickness 10 mm sheet thickness - min. 3 mm number of straightening 13 Stk. straightening roll diameter 145 mm bale length 2330 mm 150 mm straightening feed 16 m/min...

    Eilenburg, Germany
  • Trusted Seller
    1982 WMW GOTHA UBR 10

    1982 WMW GOTHA UBR 10 x 2000 /1-16

    • Manufacturer: WMW
    • Model: UBR 10X2000/1-16

    ex Warehouse plate width 2000 mm sheet thickness - max. 10 mm sheet thickness - min. 3 mm number of straightening 13 Rollers straightening roll diameter 145 mm straightening feed 16 m/min bale length 2330 mm dist...

    Eilenburg, Germany
  • Trusted Seller
    1969 WMW Wildau UBR 32

    1969 WMW Wildau UBR 32 x 2500-7/16

    • Manufacturer: WMW
    • Model: UBR 32X2500-7/16

    ex Warehouse plate width 2500 mm sheet thickness - max. 32 mm sheet thickness - max. 39 mm sheet thickness - min. 8 mm bale length 2700 mm number of straightening 7 Rollers number driven straightening rollers 5 S...

    Eilenburg, Germany
  • Trusted Seller
    1975 L.A.S.A. MONTRAGON LR 6

    1975 L.A.S.A. MONTRAGON LR 6 200 DL

    • Manufacturer: L.A.S.A. MONTRAGON
    • Power requirement: 7.5 kW

    Inside of the machine is a coil taper integrated, whcih can be adjusted via threaded spindle. description: - upper roll : width:160mm, dia. approx. 40mm, not driven, via manual adjustment - lower roll: width: 160...

    Leipzig, Germany
  • Trusted Seller
    1964 UNGERER

    1964 UNGERER

    • Manufacturer: Ungerer

    ex Works, loaded free, truck plate width 1650 mm plate thickness 3 mm straightening roll diameter 45 mm support rollers 140 Stk 17 Stk

    Eilenburg, Germany
  • Trusted Seller
    Weingarten UAH 80 + UR

    Weingarten UAH 80 + UR 80.5

    • Manufacturer: Weingarten

    Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjusta...

    Leipzig, Germany
  • Trusted Seller
    EOC nicht bekannt

    EOC nicht bekannt

    • Manufacturer: EOC
    • Power requirement: 0.55 kW

    HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stain...

    Leipzig, Germany
  • Trusted Seller
    1994 TWM Faber RE-Mat 145

    1994 TWM Faber RE-Mat 145

    • Manufacturer: Faber
    • Power requirement: 3.5 kW

    Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually -operation via control panel further features: Sheet thicknesses: 0.6 / 0.7 / 1....

    Leipzig, Germany
  • Trusted Seller
    1986 VEB ELEKTROTECH.GERAETE 4 F

    1986 VEB ELEKTROTECH.GERAETE 4 F - 6150

    • Manufacturer: VEB ELEKTROTECH.GERAETE
    • Power requirement: 1.5 kW

    Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/...

    Leipzig, Germany
12

Overview

Sheet metal processing involves the cutting, bending, and assembling of sheet metal to create different products and structures. This category includes machinery such as presses, shears, lasers, and CNC machines, all designed to handle various types of metal sheets for industries like automotive, aerospace, and construction.

FAQ

What should I consider when buying used sheet metal processing equipment?

Check the machine's age, condition, and maintenance history. Verify its compatibility with your specific metal types and thicknesses, as well as its operational accuracy and efficiency.

How can I ensure safe shipping of sheet metal processing equipment?

Hire a specialized heavy machinery transport service. Ensure the equipment is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for sheet metal processing equipment?

Regular maintenance includes inspecting and lubricating moving parts, checking electrical systems, and cleaning to prevent dust buildup. Refer to the manufacturer's manual for specific maintenance intervals and procedures.