Used feed processing machinery in Germany

Feed units VG 400

Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described.

Weingarten UZH 80

• Manufacturer: Weingarten

This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 p...

2004 SKIN PASS MILL

• Manufacturer: Andritz

WIDTH 1600 MM THICKNESS 3.05 0.45 MM Qty. 1 Second-hand skin pass mill Mfc.: Andritz, Type: SK03, Built: installed in 2004 on the basis of an Andritz stand from 1989 Products: Cold rolled, hot rolled pickled, gal...

2005 ALUMINIUM STRIP CASTER

• Manufacturer: Tianzhong (China)

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong (China), Built: 2005, Stopped: 2008, Dismantled: 2022, currently in storage Strip width: 1,400 mm, Thickness: 5 – 10 mm (AL S1...

PRESS WALTER REIS TUS 160

• Manufacturer: Reis
• Model: TUS-160

Technical specifications (approx.) Pressing force: 160 tonnes Table area: 1550 x 1800 mm Opening height up to 1800 mm Lower table load capacity up to 20t Turntable load capacity up to 6t Swing over bed: 400 mm Sw...

2008 Wandres cross brush CF 05/1750/BIP/3/1750 91391

• Manufacturer: Wandres

Control: Wall res | Dedusting brush: Yes | Brushing: Wall res | Number of aggregates: 2 | Kw power motors: 2 X0,5 | Speed-controlled: Yes | Aggregate just installed: Yes | Diffuser width mm: 1.750 | Roll transpo...

1986 VEB ELEKTROTECH.GERAETE 4 F - 6150

• Manufacturer: VEB ELEKTROTECH.GERAETE
• Power requirement: 1.5 kW

Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/...

1970 straightening machine DDR BETRIEB nicht bekannt

• Manufacturer: DDR BETRIEB
• Power requirement: 1.2 kW

straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D.

1972 WAFIOS UFA 10

• Manufacturer: Wafios
• Power requirement: 18.5 kW

WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm O...

1995 SAMCO CTH-201

• Manufacturer: Samco
• Power requirement: 5 kW

Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec...

1997 HIRSCHMILLER und HÖHN NCB 4000

• Manufacturer: HIRSCHMILLER und HÖHN
• Power requirement: 10 kW

fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul...

1974 RASTER HR 30 SL

• Manufacturer: Raster
• Model: HR 30 SL
• Power requirement: 7.5 kW

Automatic punching press 4 columns mechanical with feed unit with control panel passage widths: Column opening front=350mm and side=258mm

1985 KAISER V 40

• Manufacturer: Kaiser
• Power requirement: 15.2 kW

40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic

1990 WANZKE SP S 63

• Manufacturer: WANZKE
• Power requirement: 30 kW

Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-ro...