Building Filters
- Trusted Seller
1995 Schröder Ducter 1500
- Manufacturer: Schroeder
- Power requirement: 2 kW
CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation...
Leipzig, Germany - Trusted Seller
1991 MUHR & BENDER (MUBEA) B0 32
- Manufacturer: Mubea
-Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories!
Leipzig, Germany - Trusted Seller
1995 L.A.S.A. RH 16-200
- Manufacturer: L.A.S.A.
- Power requirement: 5.5 kW
description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and g...
Leipzig, Germany 
2002 BLM Adige LT 652/B year of manufacture 2000Watt
- Manufacturer: Adige
€40,000 was invested in 2024. Computer: 127,653 hours, Heating: HF tube: 62,850 hours, High voltage: 119,453 hours From the order confirmation upon purchase Lasertube LT652 Automatic feeder for tubes between 3200...
Frankfurt, Germany
Hidroliksan HD80
- Manufacturer: Hidroliksan
- Model: HD80
designation of the plant / description new hydraulich workshop press new hydraulich workshop press table size / working area / working size 920 x 300mm motor power (kw) / motor power (kw) 3 KW down speed (down sp...
Frankfurt, Germany
Hidroliksan HD60
- Manufacturer: Hidroliksan
designation of the plant / description new hydraulic workshop press new hydraulic workshop press gt table size / working area / working size 820x300mm motor power (kw) / motor power (kw) 3 KW down speed 6.1 mm/s ...
Frankfurt, Germany
Hidroliksan HD200
- Manufacturer: Hidroliksan
designation of the equipment / description New hydraulic workshop press with fixed cylinder table size / working area / working size 1300x450mm motor power (kw) / motor power (kw) 7,5 kW down speed 6,4 mm/s retur...
Frankfurt, Germany
Hidroliksan, HD120
- Manufacturer: Hidroliksan
- Model: HD120
designation of the plant / description New hydraulic workshop press New hydraulic workshop press table size / working area / working size 1200x400mm motor power (kw) / motor power (kw) 4 kW down speed 5.8 mm/s re...
Frankfurt, Germany
2017 Hydroautomation Needle Punch for Recheck Pipes
- Manufacturer: Hydroautomation
The following components are to be labeled on a conveyor belt using a Markator needle embosser. Before labeling, the component length is checked using an analog scale. Nio checked components are not marked and mu...
Frankfurt, Germany
Hidroliksan HD100
- Manufacturer: Hidroliksan
designation of the plant / description New hydraulic workshop press New hydraulic workshop press gt table size / working area / working size 1010 x 300 motor power (kw) / motor power (kw) 4 kW down speed 7.12 mm/...
Frankfurt, Germany
Hidroliksan HD180
- Manufacturer: Hidroliksan
designation of the plant / description New hydraulic workshop press table size / working size 1550x550mm motor power (kw) / motor power (kw) 7,5 kW down speed 8 mm/s return speed 13,3 mm/s dimensions l x w x h / ...
Frankfurt, Germany
2000 Adige, BLM LT651
- Manufacturer: Adige
REIS Robotics linear handling for stacking, HRL26 robot incl. gripper Machine data for the entire system (manufacturer's data): (Laser cutting head was exchanged in 2015, current operating hours 37,407h) Optical ...
Frankfurt, Germany- Trusted Seller
1995 SAMCO CTH-201
- Manufacturer: Samco
- Power requirement: 5 kW
Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec...
Leipzig, Germany - Trusted Seller
1991 HEIDEL MB W 140 OP 4
- Manufacturer: HEIDEL
- Power requirement: 25 kW
CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upp...
Leipzig, Germany - Trusted Seller
(2) Hot Blade Cutting Machines GoodYear Dunlop Tyres Germany GmbH HB-Cutter
- Manufacturer: Dunlop
Item Description: Lot consists of: (2) Hot Blade Cutting Machines Technical Details: Module 1.1 – Hot Blade Cutter Module 1.2 – HB Cutter (Modernized Unit) Module 2.1 – Hot Blade Cutter Module 2.2 – HB Cutter (Mo...
Fulda, Germany