Building Filters

Used machine tools in Baden-Württemberg, Germany

Trusted Seller
KD Sheet metal cleaning machine type MARGO RATIO
- used
A used KD sheet metal cleaning machine type MARGO RATIO is for sale. The machine is fully functional. For 3-edge sheets 60cm x 80cm
Keltern, Germany
Trusted Seller
2004 RAS FLEXIbend 73.40
- used
- Manufacturer: RAS
- Model: FLEXIbend 73.40
Swivel bending, CNC, J-stop - 5 axes simultaneous RAS CNC control system 6000 for CNC control of upper beam, folding beam, backgauge, folding beam adjustment and lower beam adjustment. Simple input of all necessa...
Metzingen, Germany
Trusted Seller
2012 SCHECHTL KS 200
- used
- Manufacturer: Schechtl
- Model: KS 200
Swivel bend. Manual, simple Sheet thickness (mm): 1 | Sheet width (mm): 2000 | Work area: 2.000 x 1 mm
Metzingen, Germany
Trusted Seller
1980 REIS TUS 60
- used
- Manufacturer: Reis
- Model: TUS-60
Spotting press with extendable table and swing out top plate
Metzingen, Germany
Trusted Seller
1970 REIS TUS 60 OK
- used
- Manufacturer: Reis
- Model: TUS-60
Hydraulic spotting press with swing out device Pressure capacity (to): 40 | Table length (mm): 670 | Table width (mm): 570
Metzingen, Germany
Trusted Seller
2001 REIS TUS 60 - 40
- used
- Manufacturer: Reis
- Model: TUS-60
Control SIEMENS S7-200 Swivel device 180° Centered ejector table Control device for tool cylinder Excellent, almost new condition.
Gammertingen, Germany
Trusted Seller
1983 hydraulic Die-Spotting Press Reis TUS 125 OK-50
- used
- Manufacturer: Reis
- Model: TUS-125
pressure 50to, whell away & tiltable table hydraulic ejector, upper plate moveable
Heilbronn, Germany
Trusted Seller
Sheet metal shelf
- used
- Manufacturer: vib amp kg
Large format 2500 x 1250 mm
Karlsbad, Germany
Unrolling and splitting systems
- used
- Manufacturer: Zako Skotnice
Can be ordered in different sizes and configurations, as well as with automated coil storage!
Steißlingen, Germany
Sheet metal benders
- used
- Manufacturer: Zako Skotnice
Length: 3 – 8m | Strength: 1mm/2mm/3mm | Depth(width): 1m or 1.25m | Bend angle: 145° / 165° | Bending beam: Geometry according to customer requirements | Delivery time: about 4 months or depending on the a...
Steißlingen, Germany
1984 EDEL Stanzprofi 400 #1052-01021
- used
- Manufacturer: Edel
- Model: STANZPROFI 400
Accessories tool cabinet with various punches and dies
Bühl, Germany
1994 CAMU SC 615 M
- used
- Manufacturer: CAMU
with drive Manual central spreading Brake motor Motor has only one on/off switch The reel runs
Sinsheim, Germany
2025 ARKU RM 1825
- used
- Manufacturer: Arku
- Model: RM 1825
Part leveler and strip leveler - Maximum vertical roller spacing: 8 mm - Circulating oil lubrication of the drive shafts and leveling roller bearings - Infeed/outfeed table - Speed ??control via handwheel - Strip...
Sinsheim, Germany
2025 SCHUBERT WMP 30/600
- used
- Manufacturer: Schubert
- Model: WMP 30600
- Maximum vertical roller spacing = 8 mm - Central grease lubrication of the straightening roller bearings - Circulating oil lubrication of the gear unit - Inlet table, outlet rocker - Electric motor-driven rolle...
Sinsheim, Germany
Mössner Cast plate production for semi-finished product manufacturers
- new
- Manufacturer: Mössner - Rekord
Mössner's plate production for cast slabs enables fully automated sawing of slabs into plates and, if required, milling and foiling on both sides. In order to be able to react flexibly to their customers’ individ...
Eschach, Germany