Machine Tools » Sheet Metal Processing » Baden-Württemberg

Building Filters

22

Used controller in Baden-Württemberg, Germany

OBRU WAM
- Manufacturer: OBRU
- Power requirement: 0.18 kW
With drive Manual central spreader Motor has only an on/off switch Brake mecanical Band loop control via dancer roller in start/stop mode The decoiler is running
Sinsheim, Germany
2025 ARKU RM 1825
- Manufacturer: Arku
- Model: RM 1825
- Power requirement: 1.7 kW
Part leveler and strip leveler - Maximum vertical roller spacing: 8 mm - Circulating oil lubrication of the drive shafts and leveling roller bearings - Infeed/outfeed table - Speed ??control via handwheel - Strip...
Sinsheim, Germany
1984 EDEL Stanzprofi 400 #1052-01021
- Manufacturer: Edel
- Model: STANZPROFI 400
- Power requirement: 3.2 kW
Accessories tool cabinet with various punches and dies
Bühl, Germany
GABRO PAC 750 #1052-01020
- Manufacturer: GABRO
max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm
Bühl, Germany
DURMA
- Manufacturer: Durma - Durmazlar
- Power requirement: 30 kW
Control: konventionell | Angle steel/side length: unbkt. mm | Double t-iron on the x-axis: unbkt. mm | U-iron on the x-axis: unbkt. mm | Total power requirement: 30 kW | Weight of the machine ca.: 8,6 t | Dimens...
Göppingen, Germany
DURMA PBH 240
- Manufacturer: Durma - Durmazlar
- Model: PBH 240
- Power requirement: 37 kW
Control: konventionell | Angle steel/side length: unbkt mm | Double t-iron on the x-axis: unbkt. mm | U-iron on the x-axis: unbkt. mm | Total power requirement: 37 kW | Weight of the machine ca.: 16 t | Dimensio...
Göppingen, Germany
DURMA PBH 500
- Manufacturer: Durma - Durmazlar
- Model: PBH 500
- Power requirement: 90 kW
Control: konventionell | Angle steel/side length: unbkt mm | Double t-iron on the x-axis: unbkt mm | U-iron on the x-axis: unbkt. mm | Total power requirement: 90 kW | Weight of the machine ca.: 55 t | Dimension...
Göppingen, Germany
DURMA PBH 100
- Manufacturer: Durma - Durmazlar
- Model: PBH 100
- Power requirement: 11 kW
Control: konventionell | Angle steel/side length: unbkt, mm | Double t-iron on the x-axis: unbkt. mm | U-iron on the x-axis: unbkt. mm | Total power requirement: 11 kW | Weight of the machine ca.: 3,36 t | Dimen...
Göppingen, Germany
DURMA PBH 360
- Manufacturer: Durma - Durmazlar
- Model: PBH 360
- Power requirement: 77 kW
Control: konventionell | Angle steel/side length: unbkt mm | Double t-iron on the x-axis: unbkt mm | U-iron on the x-axis: unbkt. mm | Total power requirement: 77 kW | Weight of the machine ca.: 45 t | Dimension...
Göppingen, Germany
DURMA PBH-80
- Manufacturer: Durma - Durmazlar
- Power requirement: 7.5 kW
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: 7,5 kW | Weight of the machine ca.: 2,35 t ...
Göppingen, Germany
DURMA PBM-30
- Manufacturer: Durma - Durmazlar
- Model: PBM-30
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: kW | Weight of the machine ca.: 0,2 t | Dim...
Göppingen, Germany
DURMA PBH-60
- Manufacturer: Durma - Durmazlar
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: kW | Weight of the machine ca.: 0,9 t | Dim...
Göppingen, Germany
DURMA PBM-45
- Manufacturer: Durma - Durmazlar
- Model: PBM-45
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: kW | Weight of the machine ca.: 0,6 t | Dim...
Göppingen, Germany
DURMA PBH 300
- Manufacturer: Durma - Durmazlar
- Model: PBH 300
Control: konventionell | Angle steel/side length: unbkt. mm | Double t-iron on the x-axis: unbkt. mm | U-iron on the x-axis: unbkt. mm | Total power requirement: 55+15 kW | Weight of the machine ca.: 24 t | Dime...
Göppingen, Germany
DURMA PBM-50
- Manufacturer: Durma - Durmazlar
- Power requirement: 1.5 kW
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: 1,5 kW | Weight of the machine ca.: 0,385 t...
Göppingen, Germany

12

Overview

Sheet metal processing involves the cutting, bending, and assembling of sheet metal to create different products and structures. This category includes machinery such as presses, shears, lasers, and CNC machines, all designed to handle various types of metal sheets for industries like automotive, aerospace, and construction.

FAQ

What should I consider when buying used sheet metal processing equipment?

Check the machine's age, condition, and maintenance history. Verify its compatibility with your specific metal types and thicknesses, as well as its operational accuracy and efficiency.

How can I ensure safe shipping of sheet metal processing equipment?

Hire a specialized heavy machinery transport service. Ensure the equipment is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for sheet metal processing equipment?

Regular maintenance includes inspecting and lubricating moving parts, checking electrical systems, and cleaning to prevent dust buildup. Refer to the manufacturer's manual for specific maintenance intervals and procedures.