Building Filters

Used hole

Trusted Seller
Sharp RD-1600
- Manufacturer: Sharp
- Model: RD-1600
- Column size: 431.8 mm
NEW SHARP RADIAL DRILL - 17" Column 63" Arm d MODEL: RD-1600 **MADE IN TAIWAN** (note - photo is of model RD-1230) Diameter of column: 17" Distance from column surface to spindle center, max: 63" Distance ...
Harrison, NJ
Trusted Seller
Sharp RD-1230
- Manufacturer: Sharp
- Model: RD-1230
NEW SHARP 12" Column Diameter, 48.5" Arm RADIAL DRILL MODEL: RD-1230 *MADE IN TAIWAN* SPECIFICATIONS Diameter of column: 11-13/16" Distance from column surface to spindle center, max: 48-1/2" Distance from co...
Harrison, NJ
Trusted Seller
Sharp RD-820
- Manufacturer: Sharp
- Model: RD-820
NEW SHARP 8.25" COLUMN, 33.5" ARM, RADIAL DRILL MODEL: RD-820 **MADE IN TAIWAN** SPECIFICATIONS Diameter of column: 8-1/4" Distance from column surface to spindle center, max: 33-1/2" Distance from colum...
Harrison, NJ
SHARP MANUAL LATHE
- Manufacturer: Sharp
SHARP MANUAL LATHE Swing over bed: 30” | Center distance: 120” | Thru hole: 3.75” | Spindle speeds: 5-400 rpm. | Chuck: 25” 4-jaw | Gap bed: YES | Taper attachment: NO | Equipped with: Coolant tank/pump, steady r...
$13,500 USD
Get financing
Est. $265/mo
Houston, TX
Trusted Seller
Sharp RD-2500
- Manufacturer: Sharp
- Model: RD-2500
- Column size: 549.91 mm
NEW SHARP 21.65" COLUMN, 98.42" ARM, RADIAL DRILL MODEL: RD-2500 **MADE IN TAIWAN** FEATURES: Hardened and Ground Arm slide ways, gears Arm Elevation is controlled by Hydraulic Motor Safety Device prevents arm ...
Harrison, NJ
Trusted Seller
2013 Sharp Industries RD-1600
- Manufacturer: Sharp
- Model: RD-1600
Sharp Radial Drill Model RD-1600 New in 2013 17” column diameter MT#5 spindle, 7.5 HP motor 63” column to spindle center Hardened and ground arm slide ways and gears Double tube column design to increase rigidity...
$24,900 USD
Get financing
Est. $469/mo
Blaine, MN
Trusted Seller
SHARP 1640L
- Manufacturer: Sharp
- Model: 1640L
- Spindle bore: 80.77 mm
This model is designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large throug...
Port Orange, FL
Trusted Seller
SHARP 1860L
- Manufacturer: Sharp
- Model: 1860L
- Spindle bore: 80.77 mm
This model is designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large throug...
Port Orange, FL
Trusted Seller
SHARP 1640LV
- Manufacturer: Sharp
- Model: 1640LV
- Spindle bore: 77.72 mm
Designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes.Due to its one piece casting machine base, it can support heavier cutting on large diameter materials.The large through hole all...
Port Orange, FL
Trusted Seller
SHARP 1880LV
- Manufacturer: Sharp
- Model: 1880LV
- Spindle bore: 77.72 mm
Designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large through hole allows ...
Port Orange, FL
Trusted Seller
SHARP 1660LV
- Manufacturer: Sharp
- Model: 1660LV
- Spindle bore: 77.72 mm
Designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large through hole allows ...
Port Orange, FL
Trusted Seller
SHARP 1660L
- Manufacturer: Sharp
- Model: 1660L
- Spindle bore: 80.77 mm
This model is designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large throug...
Port Orange, FL
Trusted Seller
SHARP 1880L
- Manufacturer: Sharp
- Model: 1880L
- Spindle bore: 80.77 mm
This model is designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large throug...
Port Orange, FL
Trusted Seller
SHARP 1860LV
- Manufacturer: Sharp
- Model: 1860LV
- Spindle bore: 77.72 mm
Designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large through hole allows ...
Port Orange, FL
Trusted Seller
2011 SHARP 2680B
- Manufacturer: Sharp
- Model: 2680B
- Spindle bore: 114.3 mm
SPINDLE NOSE CAMLOCK - INCH & METRIC THREADING CAPABILITIES - REMOVABLE GAP BED - 3-JAW CHUCK - QUICK CHANGE TOOLPOST - THREADING DIAL - FOOT TREADLE TYPE SPINDLE BRAKE - TAILSTOCK WITH TWO-SPEED QUILL - HARDENED...
Huntington, NY