Used Wire Bending in Ohio, USA

1967 NILSON MODEL #S3F WIRE BENDING FOUR SLIDE MACHINE . #1156822

• Manufacturer: Nilson
• Model: S3F

Specifications: New: 1967 | Clutch: ELECTRIC | Slides: 4 | Wire diameter: 3/16" | Strip width: 2" | Length of feed: 15" | Front slide stroke: 1.75" | Side slides stroke: 3.5" | Back slide stroke: 1.75" | Stripper...

1967 NILSON S3F #1156722

• Manufacturer: Nilson
• Model: S3F

New: 1967 | Slides: 4 | Wire diameter: 3/16" | Strip width: 2" | Length of feed: 15" | Front slide stroke: 1.75" | Side slides stroke: 3.5" | Back slide stroke: 1.75" | Stripper stroke: 2" | Press stroke: 1" | D...

WIRE TRIMMER AND BENDING

2-HEADS WITH CYLINDERS,HYD.PUMP AND MOTOR 4' BED SET UP FOR NOTCHING CORNERS .125- .250 WIRE DIAMETER. EQUIPPED WITH: PALM BUTTON CONTROLS

WIRE TRIMMER AND BENDER

WIRE TRIMMER & BENDER 3 HYDRAULIC HEADS FOR TRIMMING WIRE AND BENDING ENDS SET FOR .125-.250 WIRE DIAMETER. TABLE LENTH 8' LONG EQUIPPED WITH: HYD. PUMP AND MOTOR 10 H.P 220/440/3/60, PALM BUTTON CONTROLS.

LUBOW WIRE TRIMMER

• Manufacturer: Lubow

ON / OFF SWITCH NO ACCESORIES

LUBOW WIRE TRIMMER

• Manufacturer: Lubow

EQUIPPED WITH: ELECTRICAL ON / OFF SWITCH EXTRA SET OF BLADES MOTOR ............. K-C a/c, 5/230 vac. Single phase @ 60 hz, 1725 RPM WEIGTH ............... 250 Lbs O.A. DIM ............. 1'6" Long X 1'6" Wid...

LUBOW #WBR3 WIRE BENDER

• Manufacturer: Lubow

WIRE DIAMETER: 3/16" MAX. SINGLE STOP AIR OPERATED EQUIPPED WITH: TOOLING FOOT PEDAL WEIGHT 710 LBS. O.A. DIM. 101" X 17" X 42" HIGH

TAHEI M# TSF-808S WIRE BENDER

• Wire diameter: 8 mm

SERIAL ................... TSF-8H-157 MODEL .................... TSF-808S YEAR ..................... 1995 MAX WIRE DIA ............. 8 MM MIN WIRE DIA ............. 2 MM WIRE FEED LENGTH ......... INFINITE ...

3/8" DIA. HYDRAULIC WIRE BENDER

3/8" DIA. HYDRAULIC WIRE BENDER 3-HYD. CYLINDERS, SET UP V-SHAPE BENDING HYD. PUMP 20 H.P. 230/460 3/60 CAPACITY .125-.375 WIRE DIAMETER EQUIPPED WITH: 3 SETS OF V SHAPE DIES,PALM BUTTON CONTROLS.

NILSON MODEL #S3F WIRE BENDING FOUR SLIDE

• Manufacturer: Nilson
• Model: S3F

NILSON MODEL #S3F WIRE BENDING FOUR SLIDE NEW .......................... 1967 MODEL ........................ S3F DOUBLE GIBBING WITH STRIPPER & FORMER CLUTCH ...................... MECHANICAL SLIDES ..............

NILSON MODEL #S3F WIRE BENDING FOUR SLIDE

• Manufacturer: Nilson
• Model: S3F

NILSON MODEL #S3F WIRE BENDING FOUR SLIDE NEW .......................... 1967 MODEL ........................ S3F DOUBLE GIBBING WITH STRIPPER AND FORMER CLUTCH ....................... ELECTRIC SLIDES .............

72" LUBOW HYDRAULIC BENDER

• Manufacturer: Lubow

SPECIFICATIONS: TABLE SIZE: 72" L x 30" W HYDRAULIC : 8" WORK HEIGHT: 40" EQUIPPED WITH: - SELF CONT. HYDRAULICS - PUSH BUTTON CONTROLS MOTOR DRIVE: 15 HP, 230/460V, 3PH, 60CYC WIRED 240V, WITH ...

US CARBIDE ROTARY TABLE BENDER

WIRE DIAMETER: 5/16" MAX. AIR OPERATED EQUIPPED WITH: WITH TOOLING FOOTPEDAL WEIGHT: 545 LBS. O.A. DIM.: 80" X 28"...

LUBOW #4-SAB FOUR HEAD FRAME BENDER

• Manufacturer: Lubow

- CAN MAKE 1,2,3 OR 4 BENDS PER CYCLE - UP TO 40.000 BENDS PER HOUR USING 1/8" - ANGLE OF EACH BEND CAN BE INDIVIDUALLY ADJUSTED - CAN BEND DIFFERENT RADIOS - BENDS ANGLES FROM 0 TO 225 DEGREES WITH FINAL ADJUST...

LUBOW Mdl# ML-10 SINGLE STOP TABLE BENDER

• Manufacturer: Lubow
• Model: ML-10

Manufacturer: LUBOW Model: ML-10 S/N: 964 Condition: GOOD Specifications: CAPACITY 8 PIECES - 1/4" WIRE 5 PIECES - 3/8" WIRE ROTATION 400 DEGREES ROTATING DISC 10" TABLE SIZE 24" X 60" Equipped With: INFINITELY...