Used Ironworkers in Florida, USA

Trusted Seller
US INDUSTRIAL USHI-66T-DO-XT
- Manufacturer: US Industrial Machinery
- Model: USHI-66T-DO-XT
U.S. INDUSTRIAL USHI-66T-DO-XT Hydraulic Ironworker w/17" Extended Punch Throat has a punch tonnage of 66 Tons. Five workstations: punch, plate shear, angle shear, rod shear notcher plus brake attachment Has a 7....
Port Orange, FL
Trusted Seller
SCOTCHMAN 9012-24M
- Manufacturer: Scotchman
- Model: 9012-24M
The Scotchman 9012-24M has a 90-ton Punch Station capable of punching a 1-1/16” hole in 1” thick, 65,000 tensile mild steel. The Flat Bar Shear is 24” wide and is supplied with bar shear blades that can be rota...
$33,095 USD
Get financing
Est. $623/mo
Port Orange, FL
Trusted Seller
SCOTCHMAN 9012-24M
- Manufacturer: Scotchman
- Model: 9012-24M
The Scotchman 9012-24M has a 90-ton Punch Station capable of punching a 1-1/16” hole in 1” thick, 65,000 tensile mild steel. The Flat Bar Shear is 24” wide and is supplied with bar shear blades that can be rota...
$33,995 USD
Get financing
Est. $640/mo
Port Orange, FL
Trusted Seller
METALPRO MP4500XP
- Manufacturer: METALPRO
Our XP models are made and designed with production in mind. These models are efficient with an equipped 1.5HP Baldor motor, 2 stage gear pump that produces 26 stokes per minute. This XP model comes standard with...
$12,374 USD
Get financing
Est. $243/mo
Port Orange, FL
Trusted Seller
GATOR FAB TIGER 90 TON
- Manufacturer: GATOR FAB
Designed with five distinct cutting stations to minimize operational costs, reduce energy consumption, and prevent job losses. Equipped with a dual-cylinder system and dual foot pedals, allowing simultaneous or i...
Port Orange, FL
Trusted Seller
GATOR FAB TIGER 60 TON
- Manufacturer: GATOR FAB
Designed with five distinct cutting stations to minimize operational costs, reduce energy consumption, and prevent job losses. Equipped with a dual-cylinder system and dual foot pedals, allowing simultaneous or i...
Port Orange, FL
2000 PEDDINGHAUS F1170B
- Manufacturer: Peddinghaus
- Model: F1170B
Fanuc It has just had a new stripper installed that was $4,500
$27,500 USD
Get financing
Est. $518/mo
Sanford, FL
Mubea HP 1000/760 Hydraulic Punch
- Manufacturer: Mubea
110 Ton Single End Punch with 30” Throat Depth. Tonnage: 110 Tons | Throat depth: 30” | Diameter hole: 1.375” in 15/16” | Working height: 44” | Stroke: 0 - 2.75 | Full stroke per min.: 12 | Voltage: 220 / 440 | H...
Lithia, FL