Used instruments in Gauteng, South Africa

Single mA channel data logger (LES-SSN-41)

• new

• Manufacturer: Labequip

Scaling done during setup and saved in memory One channel 0~20mA with LCD (displays raw mA value) Scaling done during setup and saved in memory Customisable engineering units 32,000 record memory Sample interval ...

Deviser S30 | Satellite Meter

• new

S30 Satellite Meter is an ideal testing instrument for satellite dish installation which has extremely fast response and high accuracy and stable display. It can display MER to judge if the signal is exist. The i...

Ceyear 2438CA/CB/PA/PB Microwave Power Meter

• new

2438 series microwave power meter consists of microwave power meter host and a series of microwave power sensors. With the new design of broadband diode detector, digital signal processing technology and multidim...

DEVISER AE270 Optical power meter -70dBm~+10dBm

• new

• Pocket size, easy to carry • Cost-effective • Auto shut down and auto calibration • LCD Backlight AE Series OPM is an ideal testing instrument for fiber network installation, debugging and maintenance in optica...

Chauvin Arnoux PEL105 | Power and Energy Logger

• new

• Manufacturer: Chauvin Arnoux

* 5 voltage inputs & 4 current inputs * All-terrain shockproof casing resistant to UV light and high temperatures * Ideal for mounting on electricity poles * Self-powered by its voltage inputs up to 1,000 V * Con...

TESCA Sequential Logic Tutor

• new

The Electronic Sequencer is intended for elementary as well as advance training of digital electronics. The trainer cover regular digital circuits by solder less inter connections through use of 4 mm brass termin...

TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F

• new

• Manufacturer: LiSN

The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...

Snap On 32 mm up to 750 MHz

• new

The TBCP2-250 is a snap-on RF current monitoring probe. The probe has a very flat response with a 3dB bandwidth of 250 MHz and is characterized over the frequency range from 30kHz to 300 MHz. Upon request, it can...

Coupling Decoupling Network M3

• new

The TBCDN-M3 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M3 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

Dummy Load (-105dBc) Connector: N-M

• new

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-M

TESCA Home Automation Electrical Wiring Trainer

• new

It is the basic training course tutor in electrical technology. The training system consists of various electrical components used in home automation and wiring technology. Provision to interconnect individual co...

FiberMASTER Series – Power Meter

• new

The TREND FiberMASTER™ fibre optic testing kit allows the user to measure absolute power and calculate the loss of fibre optic links at several wavelengths. Absolute power measurements are helpful when trouble sh...

Chauvin Arnoux C.A 732 Non-contact voltage tester CAT III 1000 V LED

• new

• Manufacturer: Chauvin Arnoux

TBOH01 5 µH, 10A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025

• new

• Manufacturer: LiSN

The TBOH01 5uH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz. The LISN is inserte...

TBMR-110M EMI-ANALYZER DC-110 MHZ

• new

• Manufacturer: EMI

International EMC Standards require various spectrum measurement methods and equipment to ensure that the EUT´s electromagnetic emissions do not exceed the specified limits. The TBMR-110M EMI Analyzer is designed...