ZORN MINI 3.1 Leichtes Fallgewichtsgerät 120 mm breedte
used
- Manufacturer: ZORN
ZORN MINI - 3.1 Light Weight Deflectometer For determining the dynamic deformation modulus Evd in narrow trenches from 120 mm width Light Weight Deflectometer device for compaction quality testing following the p...
Sint-Niklaas, Belgium
SA224 200 kN
used
AX 01a, Electronic Static Plate Bearing Test Device according to DIN18134:2012-04, CNR BU 146 1992-12, ÖNORM B4417:1979-12, SN 670 317b:1998, TSC 06.720:2003, SB250 4.16, SB2000, NF P94-117-1 : 2000-04, MSZ 2509-...
Sint-Niklaas, Belgium
A122 : Barton combs (profilometers)
used
- Manufacturer: Lang
Barton combs (profilometers) Used for the evaluation of the surface roughness of rock samples. These simple devices allows very thin steel wires to perfectly lay to the outline of the sample under test, in order ...
Sint-Niklaas, Belgium
A147 : Compression device for rock cores
used
- Manufacturer: Roche
Compression device for rock cores Standard : ASTM D2938 Used to perform compression tests on rock core specimens having max. diameter 55 mm and height between 95 to 110 mm. The loading piston is sustained by two ...
Sint-Niklaas, Belgium
S253 : Compaction permeameter
used
Compaction permeameter Compaction permeameter used for determining permeability to water of soil gravel, clay, sand samples. Supplied complete with clamped upper and lower plate giving the possibility to perform ...
Sint-Niklaas, Belgium
E142E Pull-off tester Defelsko ATA50C-B
used
- Manufacturer: Defelsko
E142E Pull-off tester Defelsko ATA50C-B Adhesion testers include everything needed for testing: Automatic Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive pad, cutting tool, gl...
Sint-Niklaas, Belgium
E142E Pull-off tester Defelsko ATA50
used
- Manufacturer: Defelsko
E142E Pull-off tester Defelsko ATA50 Adhesion testers include everything needed for testing: Automatic Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive pad, cutting tool, glue w...
Sint-Niklaas, Belgium
E142E Pull-off tester Defelsko ATA20
used
- Manufacturer: Defelsko
Automatic E142E Pull-off tester Defelsko ATA20 Adhesion testers include everything needed for testing: Automatic Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive pad, cutting to...
Sint-Niklaas, Belgium
EE142P Pull-off tester Defelsko ATA20 Pelican Case
used
Pull-off tester Defelsko ATA20 Upgraded to the Pelican® case Adhesion testers include everything needed for testing: Automatic Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive ...
Sint-Niklaas, Belgium
AUTOMATIC PENETROMETER
used
AUTOMATIC PENETROMETER Semi-Automatic Dial Penetrometer Standards : EN 1426, ASTM D5, BS 2000, NF T66-004, AASHTO T49, UNI 4162, UNE 7013, NLT 124, CNR N. 24 Basically structured as mod. B056 KIT but having a mag...
Sint-Niklaas, Belgium
Sint-Niklaas, Belgium
Splitted proctor mould, 152 mm Chinese Standard
used
- Manufacturer: Proctor
Splitted Proctor mould. 152 mm Chinese Standard Height 170 mm Picture is different with reality.
Sint-Niklaas, Belgium
S372-08 load ring 30 KN d=0,001 mm digital
used
- Manufacturer: Macben BVBA
S372-08 load ring 30 KN d=0,001 mm digital height 210mm connection M10
Sint-Niklaas, Belgium
S372-09 load ring 40 KN d=0,001 mm digital
used
- Manufacturer: Macben BVBA
S372-09 load ring 40 KN d=0,001 mm digital height 210mm connection M10
Sint-Niklaas, Belgium
S372 load ring 0,5 KN d=0,001 mm digital
used
S372 load ring 0,5 KN d=0,001 mm digital height 210mm connection M10
Sint-Niklaas, Belgium
Tip: Enter manufacturer, model or keyword