- Trusted Seller
SCM Group DMC SD30-RCS 110 Double Head 43" Wide Belt Sander
new
- Manufacturer: SCM / SCMI
Description The DMC SD 30 RCS 110 is ideal for the craftsmen and the small woodworking companies. Solid wood calibrating and sanding and veneered panel sanding operations (also with honey-comb support), and also...
- Trusted Seller
SCM Group DMC sd70 RCS 135, 53" 2 Head Wide Belt Sander SW
new
- Manufacturer: SCM / SCMI
2 Head Wide Belt Sander. 1st. working group is a Steel roller, followed by a Combi unit. 70 series utilizes 103" sanding belts
- Trusted Seller
SCM SANDYA 7 WIDE BELT (2-HEAD 43") [SX-013091]
used
- Manufacturer: SCM / SCMI
- Model: Sandya
SCM SANDYA 7 RCS Wide Belt Sander 2-Head, 42" cap. - Great solid wood finish Sander. -- 1st Head: Grooved steel contact roll, 6-1/4" dia., 30 HP motor -- 2nd Head: Combination head, rubber covered contact roll, 6...
- Trusted Seller
SCM Group DMC mb90 135 DBB+
new
- Manufacturer: SCM / SCMI
53" Orbital Discs, Brush, Brush, Inverter, Electronic Auto-set, Vacuum, Fix table, TS
Tracy, CA SANDER - SIZING MACHINE - WIDE BELT - 1 SANDPAPER - 43" WIDE - SCMI
used
- Manufacturer: SCM / SCMI
- Model: 5 CS 110
SANDER - SIZING MACHINE - WIDE BELT - 1 SANDPAPER - 43" WIDE - SCMI USED - GOOD CONDITION Main motor: 18 KW (24 HP) 230/400V, 3 phases, 60 Hz, 3490 RPM Made in Italy
Chihuahua, Mexico
SANDER - SIZING MACHINE - WIDE BELT - 1 SANDPAPER - 37" WIDE - SCM
used
- Manufacturer: SCM / SCMI
SANDER - SIZING MACHINE - WIDE BELT - 1 SANDPAPER - 37" WIDE - SCM USED - VERY GOOD CONDITION VERY LITTLE USE, USED ONLY IN ONE SCHOOL
Chihuahua, Mexico
2002 WIDE BELT SANDER - 1 SANDPAPER - 43" WIDE - SCM SANDYA 5
used
- Manufacturer: SCM / SCMI
- Model: Sandya
WIDE BELT SANDER - 1 SANDPAPER - 43" WIDE - SCM SANDYA 5 USED - GOOD CONDITION Model 5 CS 110 Made In Italy Condition Good GENERAL Max. Workpiece Width 43.30 " Max. Workpiece Thickness 6.70 " # of Belts 1 Type Be...
Chihuahua, Mexico- Trusted Seller
Vancouver, Canada 
SANDER - CALIBRATING MACHINE - 3 SANDING BELTS -1 BRUSH
used
- Manufacturer: SCM / SCMI
PART: 12339 - SANDER - CALIBRATING MACHINE - 3 BELT SANDPAPER - 1 BRUSH USED GOOD CONDITION The machine is retired working in good condition
Chihuahua, Mexico- Trusted Seller
2003 SCM Sandya WIN Thickness Sander
used
- Manufacturer: SCM / SCMI
- Model: Sandya
Specifications 220 V 37 A 3 Phase 24″ Width Steel Roller Platten
Vancouver, Canada - Trusted Seller
2007 SCM Sandya 5 S Thickness Sander
used
- Manufacturer: SCM / SCMI
- Model: Sandya
Specifications 220V 85 A 3 Phase Double Belt 46″ Width
- Trusted Seller
Scm Uno CS Minimax 36″ Wide Belt Sander
used
- Manufacturer: SCM / SCMI
Specifications: 17.5 HP 230 V 3 Phase 36″ single head Standing belt size 36″ x 60″ 27 A Vacuum Bed Manual Rise and fall
- Trusted Seller
SCMI UNO RCS
used
- Manufacturer: SCM / SCMI
- Model: UNO RCS
Horsepower: 10 hp | Max. workpiece width: 36 " | Max. workpiece thickness: 6.25 " | # of belts: 2 | Voltage: 230 volts | Phase: 3-phase | Max working height: 6-1/4" | Min working height: 1/8" | Minimum working l...
- Trusted Seller
SCM dmc sd 10
new
- Manufacturer: SCM / SCMI
dmc sd 10 composition CS 95 SINGLE COMBINED UNIT "CS" equipped with: 'CR/120' roller, 120 mm diameter: 85 SH rubber coated roller manual adjustment of working height 'TRP/I' flat stiff pad made of an extractable ...
- Trusted Seller
SCM dmc sd 30
new
- Manufacturer: SCM / SCMI
- Model: DMC SD 30
dmc sd 30 composition RCS 110 With 1st "R" group (roller) and 2nd "CS" combined group (roller/pad) "B" version for RCS 95 - RCS 110 on/off pneumatic selector of the roller on the 1st "R" group on/off pneumatic se...
Tip: Enter manufacturer, model or keyword
