Used Sanders

2011 52" SlipCon Metal Working Sander BBDD-1350-MW

System includes MicroAir Wet Collector. Model Perfection DDBB-1350-MW

2023 Gottschild HBS 2600-1300-100-2

• Manufacturer: Gottschild

Gottschild Sanding and Polishing Machine HBS 2600-1300-100-2 Gottschild Sanding and Polishing Machine HBS 2600-1300-100-2 The new Gottschild sanding and polishing machine HBS 2600 has a wide range of possibili...

52 Crouch 52 Edge Sander

• Manufacturer: Crouch

Model 52, S# 110786, 6"W Belt, Manual adjusted tension, Side support table 13"W x 52"L, End support table 30"W x 12"L, 5" Dia. exhaust vent, 5hp 208-230/460v 3ph, Overall Dim. 8'L x 40"W x 57"H (on 7.5"H pallet),...

SandMan Sand Pro M7236 Down Draft Sanding Table

An economical 6′ X 3′ downdraft table that is perfect for sanding large doors, cabinets, face frames, etc. Sanding table is large enough to have (2) people sand on. Machine comes standard with casters and utili...

Denray 2 Sided 3096 “A” Frame Down Draft Sanding Table

• Manufacturer: Denray

This Denray 3096 “A” Frame Down Draft Sanding Table has (2) sides. Each side features a 25 degree 30″ X 96″ sanding area. There is a material ledge on each side as well as an 8″ tool shelf. Up top are ultra brig...

2020 Laguna M537 Enduro Pro Series

• Manufacturer: Laguna

Main Motor: 20HP Variable Feed Speed: 1HP Table Lifting Motor: 1/4HP Programmable Logic Control: Yes (Digital Readout) Automatic Thickness Control: Yes (Thicknessor) Max Sanding Height: 6″ Min Sanding Height: 1/8...

Combo Disc Sander and Grinder

Style #47979 Serial #KF1118 Type: RA 110/220 Volts 7.6 - 7.8 Amps 1725 Rpms Single Phase 60 Cycle Palm Tree # LR-000000-021219-LR-3 Bid with Confidence on this item, check our feedback!!! * All information dee...

MASTERCRAFT 8" DOUBLE END BELT SANDER

• Manufacturer: Master Craft

MASTERCRAFT 8" DOUBLE END BELT SANDER

1-1/2" Pedestal Belt Sander

1-1/2" Pedestal Belt Sander

Delta Belt and Disc Sander 52-616

• Manufacturer: Delta

Equipped with: Work tables Belt tilts to 45° and 20° Disc table tilts 45° and 45° * Like new condition.

Sander on a Stand

Tuesday, October 28, 2025 from 9:00 AM to 5:00 PM Wednesday, October 29, 2025 from 9:00 AM to 5:00 PM Scheduled Release Dates and DetailsFriday, October 31, 2025 from 9:00 AM to 5:00 PM Monday, November 3, 2025 f...

2006 Houfek 1100 RC Buldog

• Manufacturer: Houfek
• Model: Buldog

Sanding Heads: Sanding Belts: Feed System: Hold Down: Controls: Electrical:

2007 DMC Unisand K

• Manufacturer: DMC
• Model: Unisand K

Machine type: Woodworking | Capacity: ” Ø | Machine location: Ohio | Stock #: 751553 | Operating width: 1100 mm | Sanding heads: 2 | Minimum thickness: 4 mm | Maximum thickness: 170 mm | Belt dimensions: 1115 mm...