Used Sanders

Wood Sanders

• Manufacturer: Costa

* Sanders - 11 Sanders in stock *All can be test run! 2- 53" 2 heads Costa 2 platinum w39000 2 - 3 heads Costa 19900 sold 3 - 4 heads Costa 79000 time savior 49000 and 19900 I bottom calibrating Timesaver 14900...

Laguna, Pro 43″ Widebelt Sander

• Manufacturer: Laguna

This machine is equipped with 1 ( 8”) roller and a second (4”) roller followed by a wide platen for a fine finish. This allows you to use a rougher grit on the first roller (8”) that will absorb most of the impac...

AEM 36" 1 Head HD Sander

• Manufacturer: AEM

Powermatic, OES9138 Edge Sander, 3HP 3PH 230V

• Manufacturer: Powermatic
• Model: OES9138

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...

Powermatic, OES9138 Edge Sander, 3HP 1PH 230V

• Manufacturer: Powermatic
• Model: OES9138

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...

BLACK AND DECKER BELT SANDER/ROCKWELL SANDER

• Manufacturer: Black+Decker

BLACK AND DECKER BELT SANDER/ROCKWELL SANDER

Sanding Master GKSB-900 / 36" Widebelt Sander 220V (6480)

• Manufacturer: Sanding Master

(Better pictures will follow as soon as it stops raining here LOL) Sanding Master GKSB-900 / 36" Widebelt Sander 220V, 3ph Very nice condition and has been completely gone through All items are sold “AS IS” ...

Safety Speed, 4375 Wide Belt Sander

• Manufacturer: Safety Speed

The 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt translates to increased capacity, less heat accumulation, less maintenance and...

6″ x 48″ Rockwell Belt and 10″ Disc Sander

• Manufacturer: Rockwell

Return To: Sanders Volt:230, Phase: 3 Good Condition

Northtech NT-RRS80B2 Round Rod Sander Double Belt

• Manufacturer: Northtech

The NT-RRS80B2 is a two head heavy duty sander specifically designed for round rods. It is a heavy-duty industrial grade sander that rolls the part against the sanding belts as it is fed though the machine. Varia...

Timesaver 125-hdw 25” wide belt sander wet sander

• Manufacturer: Timesavers

Timesaver 125-hdw 25” wide belt sander wet sander. We are selling listed under non-working because we have not tested it. Untested, looks complete comes with an extra belt and sump system. Prefer local pick up b...

Northtech NT-MBS12-2T1R1OL Moulding Brush Sander

• Manufacturer: Northtech

Machine hp: 5.5 HP. | Direct drive (motor): Sanding Heads | Voltage, frequency: 230/460 Volt 60 Hz | Phase: 3 Phase | Amp requirement: 16.5/8.25 Amps | Configuration: 2 Top 1 Left 1 Right Opposing | 1st head: 1....

Universal belt sander Premier tilting head 6 inch belt 7x28 platen

• Manufacturer: Premier

Premier Universal tilt head sander, completely rebuilt, never used after rebuild. Unlimited rotation of head and platen for straight, flat, or curved work. 7x28 inch platen, 6 inch drum and idler rollers can util...

Heesemann MFA 8 Sander

• Manufacturer: Heesemann
• Model: MFA 8

Good condition Heesemann MFA 8 Sanders available between 2011 and 2019 years. Located in Germany and other countries. Click request price for more information.