Used Sanders in British Columbia, Canada

Progress Edgesander

Specifications 2 HP 3 Phase 60 Cycles 208/460 V 1720 RPM

Unique 4500 Shape & Sand

Specifications Model No. 4512 (2) 10 HP Direct Drive Variable Speed Floating Shapers 2 HP Floating & Tilting Sanding Motors Unique Software Makes Changeover Easy 5″ Stacking Capacity With Floating Stations Variab...

Denray 9600B

• Manufacturer: Denray
• Model: 9600B

Specifications 3 Phase 13A Receptacles 115 volts – Max 15 AMP

WADKIN BGA 2761724

• Manufacturer: Wadkin - Bursgreen

Rolling table: Features: Swan neck column one end Table for linishing Sliding pad

GENERAL INTERNATIONAL 15-010

• Manufacturer: International

Horsepower: 2 hp | # of belts: 1 | Voltage: 220 volts | Phase: 3-phase | Belt size: 6" x 108" | Front table size: 7-3/4" x 37" | Auxiliary table size: 11-3/4" x 19" | Dust chute outlet: 4" | Belt speed: 3150 fpm

2007 VIET S3 443TM

• Manufacturer: Viet
• Model: S3 443TM

Voltage: 440 volts | Phase: 3-phase | # of belts: 3 | Working width: 1350 mm (53") | Belt size: 1380 mm x 2620 mm  (54" x 103") | Material thickness: 3 mm - 200 mm | Feed belt speed: 3-20 m/min | 1st unit: 240 m...

CANTEK PR4375DA

• Manufacturer: Cantek

Horsepower: 49 hp | Max. workpiece width: 43 " | # of belts: 2 | Voltage: 575 volts | Phase: 3-phase

KING CANADA KC-2244DS

• Manufacturer: King Canada

Horsepower: 1.75 hp | Made in: TAIWAN | Drum motor: 1.75 HP, 15 Amp. | Belt feed motor: 1/8 HP | Maximum w/ of sanding: 2 x 22" | Maximum sanding capacity per pass: 1/64" | Maximum thickness of board: 5" | Minim...

WADKIN Type GZ

• Manufacturer: Wadkin - Bursgreen

Horsepower: 5 hp | # of belts: 1 | Voltage: 220/440 volts | Phase: 3-phase | Size of table: 96" x 42" | Length and width of sand belt: 294" x 6" | Cycles: 60 | Rpm: 1740

1994 RITTER R950

• Manufacturer: Ritter
• Model: R950

Horsepower: 5 hp | Voltage: 208-230/460 | Phase: 3-phase | Double sided table: 66" | Platen: 60" | Dust port: 4"

CANTEK CT-108

• Manufacturer: Cantek
• Model: CT-108

Horsepower: 1.5 hp | Voltage: 230 volts | Phase: Single-phase | Front table: 37" x 7-3/4" | Side table: 19" x 12" | Dust outlet: 4"

SCM dmc sd 10

• Manufacturer: SCM / SCMI

dmc sd 10 composition CS 95 SINGLE COMBINED UNIT "CS" equipped with: 'CR/120' roller, 120 mm diameter: 85 SH rubber coated roller manual adjustment of working height 'TRP/I' flat stiff pad made of an extractable ...

Six (6) Head Steinemann Sander

• Manufacturer: Steinemann

- Motors are 575 volt - Was in an OSB plant

PALLET OF BELT SANDER, 12 VOLT HEATER, & MORE TOOLS/HAND HELD ITEMS UPCOMING

• Manufacturer: PALLET OF BELT SANDER, 12 VOLT HEATER, & MORE

Pallet of Belt Sander, 12 Volt Heater, & More - Air Over Hydraulic Ram - 110 to 220 Volt Transformer This Item Has Not Been Function Tested Inventory# 2211

2004 CASADEI Libra 2

• Manufacturer: Casadei
• Model: LIBRA 2

Compressed air consumption 15 / 30 NI/min. Electronic digital readout of working height Electronic tracking of sanding belts Floating rubber coated pressure rollers Automatic disk brake system Two feed speeds Man...