Laguna, Pro 37″ Widebelt Sander
- Manufacturer: Laguna
This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensio...
Dundee, NY
Northtech NT-RRS80B Round Rod Sander
- Manufacturer: Northtech
- Phase type: Three-phase
The NT-RRS80B is a single head heavy duty sander specifically designed for round rods. It is a heavy duty industrial grade sander that rolls the part against the sanding belt as it is fed through the machine. Var...
Dundee, NY
Safety Speed, 4375 Wide Belt Sander
- Manufacturer: Safety Speed
The 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt translates to increased capacity, less heat accumulation, less maintenance and...
Dundee, NY
Laguna, Pro 43″ Widebelt Sander
- Manufacturer: Laguna
This machine is equipped with 1 ( 8”) roller and a second (4”) roller followed by a wide platen for a fine finish. This allows you to use a rougher grit on the first roller (8”) that will absorb most of the impac...
Dundee, NY
6″ x 48″ Rockwell Belt and 10″ Disc Sander
- Manufacturer: Rockwell
Return To: Sanders Volt:230, Phase: 3 Good Condition
$600 USDRochester, NY
Northtech NT-ES1248SE Edge Sander Single Table
- Manufacturer: Northtech
- Phase type: Three-phase
Northtech offers a large family of industrial grade edge sanders. The NT-ES948SE falls into the middle of the family of edge sanders with a 9″x48″ sanding area on one side of the machine along with an end table f...
Dundee, NY
2010 Grizzly G5394 6" x 186" Stroke Sander
- Manufacturer: Grizzly
- Model: G5394
2010 Grizzly G5394 6" x 186" Stroke Sander - Motor: 3 HP, 220V, single-phase, 17A - Sanding belt speed: 3500 SFPM - Sanding belt size: 6" x 186" - Table Size: 58" x 23-3/4" - Table vertical travel: 24" - Platen ...
$1,500 USDDundee, NY
Northtech NT-ES948SE Edge Sander Single Table
- Manufacturer: Northtech
- Phase type: Three-phase
NT-ES948SE EDGE SANDER SINGLE TABLE Northtech offers a large family of industrial grade edge sanders. The NT-ES948SE falls into the middle of the family of edge sanders and has a 9″x48″ sanding area on one side ...
Dundee, NY
Laguna, Compact 37″ 1K Widebelt Sander
- Manufacturer: Laguna
This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (10 HP) the machine is capable of dimensio...
Dundee, NY
Northtech NT 12-1300R Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, the 12-series machines are designed for industrial production use. The NT-12-1300R is a single head wide belt sander wit...
Dundee, NY
Northtech NT-12-1300RRC Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, 12-series machines are designed for industrial production use. The NT-12-1300RRC is a three head wide belt sander with o...
Dundee, NY
Northtech NT-RRS80B2 Round Rod Sander Double Belt
- Manufacturer: Northtech
- Phase type: Three-phase
The NT-RRS80B2 is a two head heavy duty sander specifically designed for round rods. It is a heavy-duty industrial grade sander that rolls the part against the sanding belts as it is fed though the machine. Varia...
Dundee, NY
Northtech NT ES43 4 Sided Straight and Curved Part Edge Sander
- Manufacturer: Northtech
- Phase type: Three-phase
NT ES43 4 Sided Straight and Curved Part Edge Sander 2 Belt with 360° rotation (1) 1HP sanding motor (1) 1/4HP 0 – 35 FPM variable speed feed Min. working length: 350mm (13-3/4") for straight workpiece 200m...
Dundee, NY
Northtec NT 12-1100RC Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, the 12 series machines are designed for industrial production use. The NT-12-1100RC is a two head wide belt sander with ...
Dundee, NY
Powermatic, OES9138 Edge Sander, 3HP 3PH 230V
- Manufacturer: Powermatic
- Model: OES9138
The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...
Dundee, NY
Denray 9600B Sander
- Manufacturer: Denray
- Model: 9600B
Good condition Denray 9600B Sanders manufactured in 2016. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword