Used Sanders

Laguna, Pro 43″ Widebelt Sander

• new

• Manufacturer: Laguna

This machine is equipped with 1 ( 8”) roller and a second (4”) roller followed by a wide platen for a fine finish. This allows you to use a rougher grit on the first roller (8”) that will absorb most of the impac...

Powermatic, OES9138 Edge Sander, 3HP 3PH 230V

• new

• Manufacturer: Powermatic
• Model: OES9138

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...

Powermatic, OES9138 Edge Sander, 3HP 1PH 230V

• new

• Manufacturer: Powermatic
• Model: OES9138

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...

Northtech NT-ES1248SE Edge Sander Single Table

• new

• Manufacturer: Northtech

Northtech offers a large family of industrial grade edge sanders. The NT-ES948SE falls into the middle of the family of edge sanders with a 9″x48″ sanding area on one side of the machine along with an end table f...

Wood Sanders

• used

• Manufacturer: Costa

* Sanders - 11 Sanders in stock *All can be test run! 2- 53" 2 heads Costa 2 platinum w39000 2 - 3 heads Costa 19900 sold 3 - 4 heads Costa 79000 time savior 49000 and 19900 I bottom calibrating Timesaver 14900...

Laguna, Pro 37″ Widebelt Sander

• new

• Manufacturer: Laguna

This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensio...

Champ Fond # 109075 Narrow Belt Sander 1ph 220V (6322)

• used

• Manufacturer: Champ

Champ Fond # 109075 Narrow Belt Sander 1ph, 220V This has a 9" capacity and is perfect for a hobbies or someone in need of something that takes up less floor space. The Foley dust collector can be easily remove...

AEM 36" 1 Head HD Sander

• used

• Manufacturer: AEM

Sanding Master GKSB-900 / 36" Widebelt Sander 220V (6480)

• used

• Manufacturer: Sanding Master

(Better pictures will follow as soon as it stops raining here LOL) Sanding Master GKSB-900 / 36" Widebelt Sander 220V, 3ph Very nice condition and has been completely gone through All items are sold “AS IS” ...

Northtech NT-MBS12-2T1R1OL Moulding Brush Sander

• new

• Manufacturer: Northtech

Machine hp: 5.5 HP. | Direct drive (motor): Sanding Heads | Voltage, frequency: 230/460 Volt 60 Hz | Phase: 3 Phase | Amp requirement: 16.5/8.25 Amps | Configuration: 2 Top 1 Left 1 Right Opposing | 1st head: 1....

Safety Speed, 4375 Wide Belt Sander

• new

• Manufacturer: Safety Speed

The 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt translates to increased capacity, less heat accumulation, less maintenance and...

6″ x 48″ Rockwell Belt and 10″ Disc Sander

• used

• Manufacturer: Rockwell

Return To: Sanders Volt:230, Phase: 3 Good Condition

DMC Unisand K Sander

• used

• Manufacturer: DMC
• Model: Unisand K

Good condition DMC Unisand K Sanders manufactured in 2004. Located in Italy and other countries. Click request price for more information.