Used p and c

Scotchman V.s.-350/p1c/pd Cold Saw

• Manufacturer: Scotchman

Control, 5 Hp, Made In The Usa, *contains 2 Pieces

2007 Hem Cyclone A-C

• Manufacturer: HEM
• Model: Cyclone A-C

HEM Cyclone A-C miter saw, 2007 model, boasts 16"Hx22"W capacity at 90°, 7.5 HP blade drive, variable speed, and 3rd holding vise. Features include overhead clamps, movable control panel, mist lubrication, and mo...

AmadaMarvelSpartan HFA460P #6693

• Manufacturer: Amada

Marvel Spartan 20″ x 18″ Heavy-Duty “Post Style” Horizontal Automatic Band Saw, HFA460P Inventory # 6693 Feed rate and feed pressure can be controlled independently for fast, accurate cutting. Set-up is simplifie...

2009 HEM DC 1420 HA-C

• Manufacturer: HEM
• Model: DC1420HA-C

1/25″ Blade Size Variable Frequency Drive Hydraulic Guide Arm Additional Features/Equipped With: Split Front Vise and 3rd Holding Vise Hydraulic Feed Traverse Chip Auger Full Stroking Vises Head Height Adjustment...

2006 Kalamazoo Machine Tool C 360 SA

• Manufacturer: Kalamazoo
• Model: C 360 SA

2006 used KMT C 360 SA semi-automatic vertical column cold saw with 6' Tigerstop. Features include 370mm blade, dual-speed 4 HP motor, mitering up to 60 degrees, manual clamping, and equipped with chip and coolan...

2018 Emmegi SCA Mini P 400 Non-Ferrous Upcut Saw w/Microbo Stop Gauge - LMC #51016

• Manufacturer: Emmegi

Single head up-acting non-ferrous cut-off machine, with left loading side, for cutting at angular settings from 15° to the left to 15° to the right and intermediate angles. New - 2018 Serial No. C120708 SPECIFICA...

2013 USED HEM 14" X 20" MODEL DC-1420HA-C DUAL COLUMN AUTOMATIC HORIZONTAL BANDSAW,

USED HEM 14" X 20" MODEL DC-1420HA-C DUAL COLUMN AUTOMATIC HORIZONTAL BANDSAW. Computer controlled feed system Cut watcher system Split front vise 3rd holding vise Hydraulic feed traverse Chip auger Full stroking...

2004 Doall C-4100 NC, 16" Programmable horizontal Bandsaw, heavy duty like Amada, Marvel, HEM, Hyd-Mech

• Manufacturer: Amada

Doal HEAVY DUTY 16" Capacity programmable Horizontal Bandsaw, With Variable vise pressure, Programmable blade speed, checked out and ready to run, like Amada, Behringer, HEM, Hyd-Mech, Kasto Variable vise pressur...

New DM-13/18P Hyd-Mech Manual Pivot Style Double Miter Band Saw

• Manufacturer: Hyd-Mech
• Model: DM1318P

Delivery: TBD Terms: Net before Shipment F.O.B.: Conway, Arkansas HydMech and SMF and Machine Tools reserves the right to modify this price without liability whatsoever. Specification and pricing may change with ...

DO-ALL 12" x 16" AUTO. HORIZONTAL BANDSAW C-1216-A

• Manufacturer: DoAll
• Model: C-1216A

USED "DO-ALL" AUTOMATIC METAL CUTTING HORIZONTAL BANDSAW HYDRAULICALLY OPERATED SERIAL# 373-81685 CAPACITY 12" x 16" RECTANGLE -------------------15" ROUND BLADE SIZE 162" x 0.035 x 1-1/4" BLADE SPEED 85 - 450 S....

2003 ARMSTRONG BLUM P400C4

• Manufacturer: Blum
• Phase type: Three-phase

Horsepower: 3.5 hp | Saw type: Mitre/Crosscut Saws | Voltage: 460 volts | Phase: 3-phase | Blade: 400 mm | Clamps: 2 x Pneumatic clamps

2000 Jaespa Dual Column 16" Fully automatic, programmable Bandsaw, like Amada, Hem, Hyd Mech, Behringer

• Manufacturer: Amada

Jaespa Dual Column 16" x 20" NC Bandsaw, w/ 1.5" Blade, Chip Conveyor, Programmable controller, full stroke vises, heavy duty design, Hydraulic blade tension, variable vise pressure and Automatic blade guide move...

DoAll C-916A

• Manufacturer: DoAll
• Model: C-916A

9" x 16" DoAll C-916A, Automatic Feed, Used Capacity: 9" x 16" | Blade speed ( variable ): 105- 275 FPM | Blade size: 1" x 0.035" x 158" | Blade wheel diameter (2): 14" | Band tension: 30,000 PSI | Automatic inde...