Used Welding Equipment in Bavaria, Germany

Clamping tube
Precision clamping tube suitable for all system bores e.g. for compensating screw clamps
Heimertingen, Germany
Adapter tube
Extension of support and clamping points adaptable with screw clamp tube Clamping possible on both sides by means of PS bolts
Heimertingen, Germany
Compensating screw clamp with spindle
for fast, powerful and positionally accurate clamping of a wide range of workpieces with differential compensation for position- and position-accurate workpiece clamping with adjusting ring for height fixation ty...
Heimertingen, Germany
Quick clamping cylinder with pressure plate
up to 5x faster clamping than with conventional screw clamps the ratchet mechanism ensures dosed, fast and vibration-proof clamping high clamping forces quickly with little effort large clamping stroke 9 mm the s...
Heimertingen, Germany
Pressure and support piece / pressure plate with prism
Printing plate with prism Positioning whether flat or on edge Clamps self-centering on the workpiece Also as support piece in the system bore Clamping of large diameters without problems No slipping and tilting p...
Heimertingen, Germany
Segement grid plate
extremely flexible clamping options due to 50 mm grid by nesting the contours into each other a continuous clamping field is possible especially for use in combination with base bridges on 3D laser machines segme...
Heimertingen, Germany
Base bridge 3U TLC 105 cpl.
3 hole pattern, for Trumpf Lasercell 105 Specially designed for use on laser machines In connection with segment grid plate D16-02100-000 many clamping possibilities Direct mounting of clamping components possibl...
Heimertingen, Germany
Spherical clamping bush with countersunk head
high quality stainless steel pressure piston self-locking in any position by means of O-ring 4 mm clamping stroke 120 N clamping force
Heimertingen, Germany
2P. Clamping bridge with 2 pressure plates steel
two clamping points simultaneously Clamping at positions that are difficult to access simultaneous clamping of several components Clamping of uneven surfaces by pendulum compensation Pressure plates can be adjust...
Heimertingen, Germany
Pressure and support piece with cone
Can be replaced in a flash: without tools, without screws O-ring prevents penetration of dirt in the joint area Available in various materials exact support on the workpiece due to pendulum compensation with cone...
Heimertingen, Germany
Multi-span support tower
for compensating clamping arm with hexagonal fastening with bolts at the table very sturdy design can be combined with other system parts, e.g. stops, by means of a system hole
Heimertingen, Germany
Screw support / Screw support D28
Support continuously adjustable in height from 75 - 95 mm Especially suitable for prism holders with arbor for direct use in the screw support Stops etc. can also be clamped in the system bore with PS bolts
Heimertingen, Germany
Prism holder D28 with mandrel ø 80 mm
Targeted pick-up of tubular elements up to Ø 100 mm Double prism for more possibilities Also suitable for rectangular tubes With screwed-in support tower Height adjustment via support sleeves for support mandrel ...
Heimertingen, Germany
Taper name D28 ø 58 mm
Pressure and support cone for holding tubes on the inner diameter Screwed in by means of countersunk screw Diameter range Ø5 - Ø55 mm
Heimertingen, Germany
Taper name D28 with thread ø 58 mm
Taper support with threaded bolt M12 For holding tubes on the inner diameter in conjunction with support set Part No.: D28-09001-005 Fixing of workpieces by means of reference bores Can also be used as point supp...
Heimertingen, Germany