Used Tanks & Kettles in Bremen, Germany

60 Liter mobile tank, Aisi 304

remarks: Tanks hang loosely in mobile frame, Aisi 304 with 6 plastic rollers; outlet with valve (1 x DN 20, 1 x DN 25)

100 liter mobile tank, Aisi 316

remarks: Loose mobile frame, Aisi 304 with 5 plastic rollers; 1 hand hole appr. 80 x 95 mm in the upper bottom; Small dents in the tank

80 liter tank, Aisi 316 with inner coating

notice: some residues of previous content, bump at the insulation jacket remarks: Tank with inner coating made of plastic (see photos); double outlet DN 25

1100 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: former support brackets were cut off by dismantling and are not available anymore; 1 heating connection cut...

1250 liter insulated Cip-tank, Aisi 304

remarks: Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray...

120 liter pressure tank, Aisi 304

remarks: 1 hand hole approx. 80 x 95 mm in the upper bottom; tank without outlet in the lower bottom; tank with smaller dents

2000 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the ...

27200 liter storage tank, Aisi 316

• Manufacturer: INOX - MAURER AG

notice: some residues of previous content, manhole cover plated remarks: Stand frame, Aisi 304; wall thickness of the lowest cylinder segment approx. 6 mm; 2 of these tanks are from the manufacturer Metkon, but a...

1027 liter horizontal pressure tank, Aisi 304

remarks: Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inne...

200 liter heat-/coolable tank, Aisi 304

• Manufacturer: F. Widmann & Sohn

max. allowable working temperature: 100 °C max. allowable working overpressure (dj): 4.0 bar max. allowable working temperature (dj): 151 °C Temperature control cylinder (dj): double jacket temperature control bo...

2500 liter oval storage tank, Aisi 304

• Manufacturer: H. BAUER Maschinen- und Apparatebau

remarks: 1 manhole in the front bottom; Tank 1 with stacking device (can be used to stack tank 2 (without stacking device); tanks were professionally cleaned and overhauled in 2024; brand new residual drain valve...

3000 liter heat-/coolable mixing tank, AISI304

Temperature control cylinder (dj): half-coil temperature control bottom (dj): half-coil remarks: Functionality of agitator and double jacket not tested

3000 liter heat-/coolable mixing tank, AISI304

Temperature control cylinder (dj): half-coil temperature control bottom (dj): half-coil remarks: Functionality of agitator and double jacket not tested

3000 liter heat-/coolable mixing tank, AISI304

Temperature control cylinder (dj): half-coil temperature control bottom (dj): half-coil remarks: Functionality of agitator and double jacket not tested

30000 liter heat-/coolable tank, Aisi 304

max. allowable working temperature: 70 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 160 °C notice: some residues of previous content, manhole cover plated remarks:...