Used Processing in Kansas, USA

LS Industries - Wire Mesh Belt Blaster - MBB-50×20
- new
- Manufacturer: LS Industries
The MBB50×20 is designed to remove rust, dust, dirt, and other debris off parts while getting carried through the machine on a wire mesh belt. Features: - The LS SureShot™ blast wheels are set in a straight pat...
Wichita, KS
LS Industries - Wire Mesh Belt Blaster - MBB-48×12
- new
- Manufacturer: LS Industries
The MBB-48×12 is designed to remove rust, dust, dirt, and other debris off parts while getting carried through the machine on a wire mesh belt. Features: - The LS SureShot™ blast wheels are set in a straight pa...
Wichita, KS
LS Industries - Pipe Blaster - ID-PB2.375-11
- new
- Manufacturer: LS Industries
The LS ID Pipe Blaster 2.375-11 has the ability to clean the inside surface of pipe from 2.375” to 11” in diameter. Features: - The mechanical driven lance provides a consistent finish throughout the length of ...
Wichita, KS
LS Industries - Pipe Blaster - OD-PB2-12
- new
- Manufacturer: LS Industries
The OD-PB2-12 is designed to blast the outside surface of pipe from 2” to 12” in diameter. Features: - LS TurboShot™ blast wheels are gravity fed which keeps the machine compact and easy to maintain - The under...
Wichita, KS
LS Industries - Table Blaster - LSTB36x29
- new
- Manufacturer: LS Industries
The LSTB36x29 is built to provide years of trouble-free service with minimal maintenance and repeatable results. Features: - Mounted swing door(s) - Door safety interlock - Access door for maintenance - Long li...
Wichita, KS
LS Industries - Vertical Hone - VHX
- new
- Manufacturer: LS Industries
The VHX is designed for efficiently solving any hydraulic cylinder, compressor, marine motors, plastic extrusion liner, etc. Hones parts from 0.98" - 17.72". Features: - Hone Shaft - Hone Head - 7 - Single Mast...
Wichita, KS
LS Industries - Spinner Hanger Blaster - SH24x42
- new
- Manufacturer: Spinner
The LS SH24x42 was designed to hang the product/parts to remove rust, dust, dirt, and other debris with a 360-degree blast. Features: - Compact design - Heavy-duty manganese cabinet - Replaceable cast chrome we...
Wichita, KS
LS Industries - Pipe Blaster - ID-PB2.375-7
- new
- Manufacturer: LS Industries
The LS ID Pipe Blaster 2.375-7 is a 6-lance system that will blast the internal surface of up to 6 pipes at one time with a diameter of 2.375” to 7”. Features: - The 6 lances are mounted on a mechanically drive...
Wichita, KS
LS Industries - Tumble Blasters - 34B
- new
- Manufacturer: LS Industries
The 34B is designed to remove rust, dust, dirt, and other debris with a full 360-degree blast. Features: - heavy-duty steel construction - 0.25" manganese liners in all direct shot patterns - Shot wheel is line...
Wichita, KS
LS Industries - Cylinder Blaster - PTB-500
- new
- Manufacturer: LS Industries
The PTB-500 is designed to remove rust, dust, dirt, and other debris on cylinders up to a standard 500 gallons. Features: - Replaceable cabinet liners - 4 - LS TurboShot wheels - Adjustable rollers
Wichita, KS
LS Industries - Flow Through Washer - 72×36-FTW
- new
- Manufacturer: LS Industries
The 72x36-FTW cleans oil, grease, grime, and other contaminants on industrial arts or cylinders by simply loading them on the conveyor belt. Features: - Insulated wash tank - Filter debris screen - 24" w convey...
Wichita, KS
LS Industries - Blast Wheel - Bi-Directional Direct Drive LS SureShot™ 24”
- new
- Manufacturer: LS Industries
The LS SureShot™ Bi-directional Drive Blast Wheel is designed for long life, optimum performance, versatility and simple maintenance.
Wichita, KS
LS Industries - Blast Wheel - Shot Rotor
- new
- Manufacturer: LS Industries
The LS Shot Rotor is a very unique blast wheel that works differently than most others. The Rotor is designed to throw an even curtain of shot across the length of the Rotor as it blasts a rotating part. Feature...
Wichita, KS
LS Industries - Blasters - Crankshaft
- new
- Manufacturer: LS Industries
The LS Industries Crankshaft Blaster is a manual air blast system with a roller cart that can rotate the crankshaft inside the blast cabinet. Features: - A work platform for 1 operator and single lance connecte...
Wichita, KS
LS Industries - Rooms/Booths - Blast Room
- new
- Manufacturer: LS Industries
LS Industries Blast Rooms are designed to deliver the best surface preparation you can achieve, while producing a safe environment and meet production rates. Features: - Storage hopper for abrasive media - Prot...
Wichita, KS