Used Heat Exchangers in New Jersey, USA

Stainless Steel 316 Graham Shell and Tube Heat Exchanger - IPP# 221161

• Manufacturer: Graham

Overall length, 13'

Stainless Steel 321 Clad Shell and Tube Heat Exchanger - IPP# 222148

• Manufacturer: Luigi-Resta

321 SS tubes (Steel Type SA213 TP321), 321 SS tube sheets (Steel Type SA336 TP321), 321 SS clad CS heads (Steel type SA336 Gr.F22 CL3 +CRO TP347), 321 SS clad Shell (Steel type SA336 Gr.F22 CL3 +CRO TP347) Canadi...

Tantalum & Glass Lined Pfaudler Shell and Tube Heat Exchanger - IPP# 203648

• Manufacturer: Pfaudler

Rated FV/300 psi @ -20 to 425 degrees tube side; FV/50 psi @ -20 to 425 degrees F shell side. with glass lined clamped heads

Spiral Heat Exchanger 0.4 m² (4.3 ft²) Glasslined - IPP# 229078

• Manufacturer: Qvf-Corning

QVF-Corning S-48 type: HE-4, 1000 mm total lengtht

Spiral Heat Exchanger 2 m² (21.5 ft²) Graphite - IPP# 211704

• Manufacturer: GAB Neumann GmbH

Service side rating: 6 bar @ -10 to 80 degrees C Product side rating: 4 bar @ -10 to 165 degrees C

Spiral Heat Exchanger 4.2 m² (45.2 ft²) Graphite - IPP# 211706

• Manufacturer: GAB Neumann GmbH

Service side rating: 6 bar @ -10 to 80 degrees C Product side rating: -1/3 bar @-10 to 165 degrees C Total weight 370 kg

Stainless Steel 316 Korpershoek Shell and Tube Heat Exchanger - IPP# 221535

• Manufacturer: Korpershoek

(2) 316 stainless steel bonnet heads

Stainless Steel 316 All-Weld Shell and Tube Heat Exchanger - IPP# 214206

• Manufacturer: All-Weld

CRN #: K5721.5 OIN #: 5.882.517 CS 3/16" thick baffles with expansion joint. Shell has (20) CS 3/16" thick baffles. (2) 316LSS channel heads 3/16" thick with flat end covers mounted on davits.

Plate and Frame Heat Exchanger 9.3 m² (100 ft²) - IPP# 216324

Chilled water service Size unknown, insulated

Paul Mueller AT 10 C20 Plate and Frame Heat Exchanger - IPP# 206746

• Manufacturer: Paul Mueller

Part number: 981398 MDMT is 32 degrees F @100 psi.

Block Heat Exchanger 17 m² (183 ft²) Graphite - IPP# 243451

• Manufacturer: Ralph Coidan

asset #10005697 design code: ASME VIII DIV 1 PED CAT III gas group 1

Block Heat Exchanger 1.86 m² (20 ft²) Graphite - IPP# 94491

cylindrical block

Block Heat Exchanger 3.6 m² (38.8 ft²) Graphite - IPP# 91078

• Manufacturer: GAB Neuman

Blt to TUV standard. Design pressure: service side 3 bar and full vac; product side 3 bar and full vac @ -10/+165 deg C.

Block Heat Exchanger 3 m² (32.3 ft²) Graphite - IPP# 89733

• Manufacturer: Carbone

Additional Info:

Block Heat Exchanger 7.2 m² (77.5 ft²) Graphite - IPP# 211797

• Manufacturer: GAB Neumann GmbH

material G 12-12-165 pressure rated 3 bar @ 165 deg C (service side), 3 bar @ 165 deg C (product side), volume both side 25 ltr. Total weight 560 kg.