Used Processing in Bremen, Germany

1027 liter pressure tank, Aisi 304

remarks: Loose frame, Aisi 304; 1 hand hole approx. 230 x 235 mm in the front bottom (hand hole cover made of plastic); 1 pipe inside the tank

10000 Liter tank for specific weights up to 1.4 KG/L, Aisi 316

• Manufacturer: A&B Apparate- & Behältertechnik Heldrungen GmbH

max. allowable working temperature: 80 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Type plate no longer available; further technical documents available; Di...

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

max. allowable working temperature: 120 °C remarks: Manhole diameter approx. 510 mm; 4 round openings and 1 further small opening in the lower bottom; the seam of the insulation jacket was slightly loose in one p...

1027 liter horizontal pressure tank, Aisi 304

remarks: Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inne...

12220 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom material temperatur control system: AISI 304 (V2A) 1.4301

10468 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; stated total height is estimated; foot ends were cut off during dismantling and ar...

6050 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet padded (see photos) material temperatur control system: AISI 304 (V2A) 1.4301

1000 liter cone container, Aisi 304

remarks: Manhole diameter approx. 410 mm; Frame, Fe (galvanized; struts partly slightly bent); Product adherence inside

500 liter pressure tank, Aisi 304

remarks: Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover)

Plate heat exchanger, stainless steel

• Manufacturer: APV Rosista GmbH

Other: - Manufacturer: APV- Type: DELTA SR52- Permissible operating pressure of the frame: 13 bar

25000 liter heat-/coolable tank, Aisi 304

• Manufacturer: Alfa-Laval

Temperature control cylinder (dj): double jacket notice: some residues of previous content, pipe end cut flush remarks: Double jacket around approx. 1.800 mm of the cylinder height; Manhole approx. 410 x 510 mm; ...

1100 liter pressure container, Aisi 316

remarks: 4-legged frame, Aisi 304; Manhole diameter approx. 355 mm; Outlet inner tube diameter approx. 72 mm (with screwed-on butterfly valve; enlargement of the outlet to inner tube diameter approx. 80 mm); Cont...

1200 liter tank, Aisi 304

remarks: Frame, Aisi 304; Manhole approx. 300 x 440 mm; 1 tank with 1 dent in the cylinder (see photos)

600 liter tank, Aisi 304

remarks: Frame, Aisi 304; Manhole approx. 300 x 440 mm; 1 tank with 1 dent in the cylinder (see photos)

100 liter tank, Aisi 304

• Manufacturer: ABAB Allgemeine Behälter- u. Apparate Bau

remarks: Hanging design on 2 supports, Aisi 304; Outlet fitting no longer available