Used Processing

West Salem Machinery 4260S

• Manufacturer: West Salem Machinery

-300 HP -Direct Drive Motor with 60″ Wide VFD Panel -3HP HYD Power Pack -Top Loading Infeed Chute -42″ Rotor Diameter Drawing Available

Ringfeder RFN 4181-560X940 Shrink Disc

• Manufacturer: RINGFEDER

“NEW OLD STOCK, SHELF WEAR & LIGHT RUST” Model number: RFN 4181-560X940 | Mpn: RFN 4181-560X940 | Shipping weight: 1739 lbs | Shipping dimensions: 41 x 41 x 14 in | Additional notes: NEW OLD STOCK, SHELF WEAR & L...

Conair Tb250 Gravimetric Blender 115v-ac 1ph

• Manufacturer: Conair

“Used” Model number: TB 250 | Mpn: TB 250 | Shipping weight: 733 lbs | Shipping dimensions: 98 x 55 x 43 in | Reference sku: 1070298

Vemag HP-10-C Vacuum Filler Machine 240/460/575v-ac 18kw 3ph 350l/min

• Manufacturer: Vemag

“Parts” Model number: HP-10-C | Mpn: HP-10-C | Shipping weight: 2468 lbs | Shipping dimensions: 87 x 78 x 51 in | Reference sku: 1705898

Wexten CO60PTS Oil Cooler 220v-ac 60lpm

• Manufacturer: WEXTEN

“New without Factory Packaging” Model number: CO60PTS | Mpn: CO60PTS | Shipping weight: 563 lbs | Shipping dimensions: 58 x 47 x 31 in | Reference sku: 1074052

Conair Tb250-4 Gravimetric Blender 115v-ac 1ph

• Manufacturer: Conair

“W/O TOP ATTACHMENT” Model number: TB 250-4 | Mpn: TB 250-4 | Shipping weight: 578 lbs | Shipping dimensions: 83 x 43 x 39 in | Additional notes: W/O TOP ATTACHMENT | Reference sku: 1070296

Fives North Armerican Combustion Hiram 4575-12 High Velocity Gas Burner 12in

• Manufacturer: FIVES NORTH AMERICAN COMBUSTION

“New without Factory Packaging” Model number: 4575-12 | Model line: HIRAM | Mpn: 4575-12 | Shipping weight: 403 lbs | Shipping dimensions: 57 x 30 x 30 in | Reference sku: 1027908

Hydrobotic SEACLOPS 500 Underwater Rov Remotely Operated Vehicle With Controller

• Manufacturer: HYDROBOTIC

“CASES INCLUDED” Model number: SEACLOPS 500 | Mpn: SEACLOPS 500 | Shipping weight: 303 lbs | Shipping dimensions: 51 x 47 x 43 in | Additional notes: CASES INCLUDED | Reference sku: 1039027

Dings Overbelt Magnet

30" wide by 5' long Dings Overbelt Magnet 30" Wide 5' Long Good rectifier Comes with the stand Buyer responsible to disassemble and transport Selling as-is where-is.

2021 SnowBall Machinery SNCF-600

• Manufacturer: SnowBall Machinery

Machine type: Process Equipment | Machine location: Upon Request | Stock #: 639717 | -capacity: 600L | -pneumatic requirements: 6 bar, 6L/min | -electrical requirements: 220V, 3P, 60Hz | -dimensions: 55.12″ x 35...

2020 Convectium 710 Shark 010-0707100-0007-0A

• Manufacturer: Convectium

Fill up to 100 devices at a time in less than 60 seconds Dual heat injection system (Max temp of 125C) 120 PSI Maximum Pressure / Ultra-Quiet – Only 60 decibels

2013 Frick XLP2-1012-503

• Manufacturer: Frick

335 Evaporative Tons Rated for R-717 and R-134a Refrigerants Base Heat Rejection = 6953 MBTUH 30 HP Fan Motor (2) 5HP Pump Motor Also Included: Mycom 200VLG Rotary Screw R-717 Refrigerant Compressor 400HP 480V 3P...

Amtech ATC-4400

• Manufacturer: Amtech

Machine type: Process Equipment | Machine location: Pennsylvania | Stock #: 487859 | -motor: 50 HP | -cfm: 8000-12500 | -dust drum: 55 Gal | -electrical requirements: 280/460V, 3P, 60Hz | -dimensions: 82.5″ x 53...

2017 Otec DF80 Df-series Pharma Drag Finishing Unit 230v-ac

• Manufacturer: OTEC

“Used” Model number: DF80 | Mpn: DF80 | Shipping weight: 1403 lbs | Shipping dimensions: 82 x 56 x 46 in | Reference sku: 1736885