Used Machine Tools in Bavaria, Germany

1995 Dräco K9 double standing seam machine
- Manufacturer: Dräco
Used Dräco K9 double standing seam machine for closing angle and double folds, includes 1 set of cutting rollers for fold removal, including folding rollers. The machine is currently converted to cutting operati...
Hohenbrunn, Germany
2021 Schechtl MAF 400 swivel bending machine
- Manufacturer: Schechtl
Used Schechtl swing bending machine with the following equipment: - 1 sharp guide bar 20°, offset, 1 mm radius for the upper beam - 1 insert rail each 10/100 mm and 24/100 mm for the bending beam - 2 foot switc...
Hohenbrunn, Germany
Auction
MAZAK SUPER 250 MY Lathe Mazak Super Quick Turn250
- Manufacturer: Mazak
- Model: SUPER QUICK TURN 250
- Spindle bore: 65 mm
Bar work up to a diameter of max. 65 mm (can be equipped with fixed and driven tools as required) Without
Huisheim, Germany
Visit Auction Website
Fasti 125-10/1.5 round bending machine
- Manufacturer: Fasti
Used Fasti rotary table saw, motorized, foot-operated, manual rear angle feed, emergency stop cord, very good condition The machine will be professionally repaired, inspected, and cleaned, and will then be full...
Hohenbrunn, Germany
1992 Ozamech KM 3000-2.5 swivel bending machine
- Manufacturer: Ozamech
Used Ozamech folding machine, easy program angle setting on the side stand, with foot switch, removable extension rail, upper jaw rail approx. 30 degrees Machine is unrepaired, in its current condition
Hohenbrunn, Germany
1991 Jorns SuperLine-300-SO-CNC-6 long bending machine
- Manufacturer: Jorns
This long-folding machine SuperLine-300-SO-CNC-6 from Jorns AG is a well-preserved, robust hydraulic swivel bending machine for precise and repeatable bending work in sheet metal processing. It is especially suit...
Hohenbrunn, Germany
2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kW
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany
2011 Jorns TwinMatic-300-SO-1150-CNC8000 double folding machine
- Manufacturer: Jorns
Used Jorns TwinMatic-300-SO-1150-CNC8000 double press brake. The machine is a robust welded construction with 9 columns, 9 clamping cylinders, and 36 K38 coupling joints mounted on a base frame. The machine is ...
Hohenbrunn, Germany
2009 ERMAK HGS-A guillotine shears
- Manufacturer: Ermak
- Model: HGS-A
- Maximum thickness: 6 mm
- Power requirement: 11 kW
Used Ermak hydraulic guillotine shear, folding backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, and 14 hold-downs. The machine will be professionally repaired, inspected, and cleane...
Hohenbrunn, Germany
2010 Thalmann TD 200-6.4 double press brake
- Manufacturer: Thalmann
- Stroke length: 200 mm
Used Thalmann double bending machine, 5 finger grippers, Safety device: light barrier, Machine is sold as is, without warranty or functional test.
Hohenbrunn, Germany
Auction
MIYANO - BNC-42CS - 2004 - CNC lathe with bar feeder FMB turbo
- Manufacturer: Miyano
- Model: BNC42
- Spindle bore: 42 mm
Go to our auction page for more information
Möttingen, Germany
Visit Auction Website
2000 long bending machine Jorns ML200-SO-CNC400A-4
- Manufacturer: Jorns
Used Jorns hydraulic swing bending machine, with material thickness adjustment, hydraulics on the left side of the machine, without roller shear, bending beam with removable extension rail approx. 8mm, 3 stop fi...
Hohenbrunn, Germany
2019 press brake Adira PM 022040
- Manufacturer: Adira
- Power requirement: 15 kW
Like-new Adira press brake with CNC-controlled crowning, LazerSafe safety system, foot pedal, and standard tool set. The machine is in like-new condition, having only a few operating hours. It was never used bey...
Hohenbrunn, Germany
2003 Long bending machine Jorns NL125-SM-OP 2100/2-4
- Manufacturer: Jorns
Used hydraulic Jorns press brake, with foot switch, emergency stop rail, retractable sheet metal supports, hydraulic roller shear up to 1.50 mm, control with 9 bending angles. The machine has been professionally...
Hohenbrunn, Germany
2013 double shearing machine Jorns TP150-RH-1150-CNC8000-6.4-hs
- Manufacturer: Jorns
Double-press brake machine, with the following equipment: - 4 pneumatic clamping fingers with short clamping fingers - long accessory rail - foot control - sheet metal cassettes - upper beam with bending groove -...
Hohenbrunn, Germany