Used Filter Presses in New Jersey, USA

Seitz Enzinger Noll Stainless Steel Polishing Filter Press

• Manufacturer: Seitz

Seitz Enzinger Noll Orion Stainless Steel Polishing Filter Press - Type OF 100/200. (75) 39" x 39" (100 cm) Plates. 0.5" Plate Thickness. Overall dimensions = 23' lgth. x 7' ht. x 5' wide. approx 8,000 lbs plus...

Filter Press, 958 Sq.Ft. Filtration Area, Polypropylene Plates, Manufactured by Pacific Press Co. - IPP# 238423

• Manufacturer: Pacific Press Co

Side bar design with semi automatic plate shifter four eye discharge washing plates with ¼” recess Press can be upgraded to 100 cu ft cake capacity and 2079 sq. ft. filtration area with additional plates Single h...

5 sq ft j press plate & frame filter press

• Manufacturer: J Press

Used 5 cuft filter press. Manufactured by J-Press. (20) Poly with Stainless cladding Plates.

15 sq ft jwi plate & frame filter press

• Manufacturer: US Filter / JWI

Used 15 cu ft Filter Press. Manufactured by JWI. Polypropylene plates.

50 sq ft jwi plate & frame filter press

• Manufacturer: US Filter / JWI

Used 50 cu. Ft. recessed plate filter press. Built by JWI . Unit has (61) 1000mm poly plates. Air/hydraulic closure device. 2" feeds. (4) 2" corner outlets.

Polypropylene Schenk Filter Press - IPP# 231224

• Manufacturer: Schenck

stainless steel recessed plate and polypropylene frame filter press (2) eye top and bottom feed/discharge stainless steel skeleton, hydraulic press mechanism with built on powerpack and manual controls

Polypropylene Netzsch Filter Press - IPP# 221712

• Manufacturer: Netzsch

Kom #740.213 (25) membrane plates, (24) recessed plates, (2) end plates, 20 mm deep recess, (4) corner 50mm discharge, 100mm center feed, cake thickness: 35 mm, single screw press mechanism driven by a hydraulic ...

Polypropylene Haecker Filter Press - IPP# 103091

• Manufacturer: Haecker

recessed plate filter press. 2 end plates, 50 mm center feed, motorized hydraulic closure.

Polypropylene Schule Filter Press - IPP# 207197

• Manufacturer: Schule

(2) end plates recess 700mm x 700mm x 7mm deep, 70mm center feed, 50mm 4-corner discharge, hydraulic press mechanism

Sperry Filter Press Size C-7 #17295

• Manufacturer: Sperry Filter Press

7" x 7" 316 stainless steel filter press by sperry filter press, size c 7, serial # x43253. Features 6-1" thick frames and 7-1. 250" thick plates with 3/8" top and bottom female npt ports, rated for 100 psi servi...

Polypropylene Schenk Membrane Filter Press - IPP# 204563

• Manufacturer: Schenck

Membrane filter press, hydraulic driven by Siemens 500 V 50 Hz 4,2 A 1410 rpm EEx e II.

Polypropylene Filter Press Plates Only - IPP# 108390

(16) chambers, 1.72 cubic meter cake capacity 2-eye top side feed, Red and blue buttons (washing plates).34.5

Polypropylene 40/60 Filter Press - IPP# 219883

Seitz Enzinger plate and frame filter press with (4) eye. Manual Screw closure

Filter Press - Polypropylene by Edward & Jones - IPP# 706517

• Manufacturer: Jones

recessed/membrane Polypropylene plate filter press (13) recessed plates, recess is 430mm x 430mm x 15mm deep, (12) non recessed membrane plates (these have attachment for air discharge) manual hydraulic press mec...

Polypropylene 40/60 Filter Press - IPP# 219882

Seitz Enzinger plate and frame filter press (2) end plates (4) eye. Manual Screw closure.