- Trusted Seller
2003 Soilmec R312-200 Hydraulic Drill Rig
- Manufacturer: Soilmec
- Model: R-312
- Horsepower: 197 hp
Soilmec R312-200 Drill Rig Hydraulic Self Erecting Drill Rig Configured for both CFA and Rotary Duties 2003 Maximum Torque: 130 kNm Cummins Diesel Engine – 153kW Crowd Ram Rotary Configuration Maximum Dia...
Chesterfield, United Kingdom - Trusted Seller
1999 Casagrande B130 Hydraulic Drilling Rig
- Manufacturer: Casagrande
- Model: B130
Casagrande B130 Hydraulic Drilling Rig Year 1999 This is based on CAT320 base carrier on Sempirana tracks Rigged currently in CFA but said to have a full rotary kit with only a few pins missing but would need ...
Chesterfield, United Kingdom - Trusted Seller
2012 Soilmec SR30s Hydraulic Drilling Rig
- Manufacturer: Soilmec
- Model: SR-30
- Horsepower: 200 hp
- Hours: 7,746 h
Soilmec SR30s Hydraulic Drill Rig Hydraulic Drill Rig - Configured for CFA & Rotary Duties 2012 Only 7,446 hours Max Torque: 130 kNm CFA: Max Diameter: 750mm Max Depth: 23.0m (17.0m + 6m Kelly Extension & ...
Chesterfield, United Kingdom - Trusted Seller
1980 Watson 5000 Crane Attached Drilling Rig
- Manufacturer: Watson
- Model: 5000
Crane Attached Drilling Rig 5 units available Mid 1980s 13,300kgm Torque 30m Drill depth This can be easily extended. The Kelly bar on a Watson is square section bar. We have a kelly bar 2 section 17m kelly bar G...
Chesterfield, United Kingdom - Trusted Seller
2011 Sonic Drill SDC-390
- Manufacturer: SDC
- Hours: 5,500 h
Used Sonic Drill SDC-390 Geotechnical Drill Rig for sale. 5,500 Hours Engine: Caterpillar, 6 CYL, 6.6L, Turbocharged, 225HP @ 2200 RPM, Tier 4 “Flex”, Hydraulic Oil Cooler, 24VDC Mast: Single Tube Construction, 1...
2023 Versa Drill KmN1.4S
- Manufacturer: Versa-Drill
- Hours: 1,836 h
- Gross weight: 10,660 kg
Coring and Exploration Drill Rig 1836 hours Design optimized for surface operation with low ground pressure CAT Tier 4 engine Holding capacity 17236 kg Spindle interior dimension 4.9 in (124 mm) PWL rod Chuck ope...
Middlesbrough, United Kingdom
2022 Versa Drill KmN1.4S
- Manufacturer: Versa-Drill
- Hours: 2,409 h
- Gross weight: 10,660 kg
Coring and Exploration Drill Rig 2409 hours Design optimized for surface operation with low ground pressure CAT Tier 4 engine Holding capacity 17,236 kg Spindle interior dimension 4.9 in (124 mm) PWL rod Chuck op...
Middlesbrough, United Kingdom- Trusted Seller
Hutte HBR 205 GT
- Manufacturer: Hutte
- Hours: 9,000 h
Used Hutte HBR 205 GT Geotechnical Drill Rig for sale. 9,000 Hours Double rotary Side Mast Articulation Pull down 14T Pull Back 20T Remote control drilling controls Manual tracking controls on the rig 300L/M Pist...
- Trusted Seller
Beretta T21
- Manufacturer: Beretta
- Hours: 8,000 h
Used Beretta T21 Geotechnical Drill Rig for sale. Hours 8,000+/- 22 2v head Set up for coring and open hole drilling Single clamp No hour clock New timing belt New shaft and head seals Safety cage 1,200kg weight
- Trusted Seller
Socomafor 35
- Manufacturer: Socomafor
- Hours: 1,490 h
Used Socomafor 35 Geotechnical Drill Rig for sale. 1,490 Hours New beretta 22 2v head fitted- 2 speed: Max Speed: 92 rpm (in 2nd speed the max speed is around 154 rpm Drilling alpications: Geotechnical Soil inves...
- Trusted Seller
Comacchio MC 305
- Manufacturer: Comacchio
- Model: MC305
- Hours: 5,470 h
- Machine weight: 3,300 kg
Used Comacchio MC 305 Geotechnical Drill Rig/Micro Piling Rig for sale. 5,470 Hours Four gear rotary head Fixed mounted crawler chassis. Max width: 1200mm Powered by a HATZ 4L-41C 47kW diesel engine. 1400 – 2400 ...
- Trusted Seller
Comacchio MC 900 GT
- Manufacturer: Comacchio
- Model: MC900GT
- Horsepower: 174 hp
- Hours: 811 h
Used Comacchio MC 900 GT Geotechnical Drill Rig for sale. Current Engine Hours 811 7,000 Hours before Engine was replaced Double rotary head Undercarriage: Max climbing ability 36% Max speed 0.93mph Powerpack: De...
- Trusted Seller
Comacchio MC5D
- Manufacturer: Comacchio
- Model: MC5D
- Horsepower: 101 hp
- Hours: 1,100 h
Used Comacchio MC5D Geotechnical Drill Rig/Micro Piling Rig for sale. 1,100 Hours Technical data Machine total weight with powerpack: 7,400kg Hydraulic powerpack Diesel engine type John Deere 4045 HF Engine power...
- Trusted Seller
Fraste PLG
- Manufacturer: Fraste
- Hours: 2,500 h
- Machine weight: 3,700 kg
Used Fraste PLG Geotechnical Drill Rig for sale. 2,500 Hours Mast: Rotary head:
- Trusted Seller
Massenza MI6
- Manufacturer: Massenza
- Model: MI6
- Hours: 7,000 h
Used Massenza MI6 Geotechnical Drill Rig for sale. 7,000 Hours Double clamped Ce marked Engine and power: Rotary and drilling: Rotary head: TM6.1, with multiple torque and speed settings (e.g., 6000 Nm @ 76 rpm o...
Tip: Enter manufacturer, model or keyword