Used teste in doitsu

Hem Saw H101A Saw *USED / Tested / Cleaned / Painted* See Video

• Manufacturer: Hem Saw

Everett Model 14-16" Cutoff Saw TESTED Chop Saw Abrasive Hydraulic Downfeed

“Tested In working condition, ready to use” Nice working Everett Model 14-16" Cutoff Saw Power Chop Saw with Hydraulic Down feed tested this morning everything in working condition, also comes with custom made bl...

MSC 4-1/2" x 6" Metal Cutting Bandsaw compact 110V 1/2 HP COMPACT... TESTED!!!

• Manufacturer: MSC

This is a MSC 4-1/2" x 6" Metal Cutting Bandsaw compact 110V 1/2 HP... TESTED AND RUNNING PERFECT! This unit is perfect for Portable Job Cutting at Location... 110V Model MSC #951305 Serial #199207 Cutting Capa...

Hyd-Mech H10A Fully Automatic Horizontal High Production Bandsaw TESTED!!

• Manufacturer: Hyd-Mech
• Model: H10A
• Phase type: Three-phase

““Call for photos and specs number: 786/277/7843. Additional photos and videos available upon request."” MD MACHINERY CENTER HIGH QUALITY, GOOD PRICING, FAST SHIPPING! QUESTIONS CAN BE ANSWERED BY CALLING 786/277...

DELTA 52-977 Band Saw USED

• Manufacturer: Delta

Cat. No. 52-977 Cat. No. 28-212 115/230 Volt Single Phase 60 Hz 9.6/4.8 Amp 93.5" Blade Tested Good Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available up...

1955 DoAll 16-2 contour vertical band saw 16" Throat, 24" x 36" Tilting Table, Variable Speed, Blade...

• Manufacturer: DoAll
• Model: 16-2

1955 DoAll 16-2 contour vertical band saw 45-55681 16" Throat, 24" x 36" Tilting Table, Variable Speed, Blade Welder Working Condition Unknown - The running and operating condition of the equipment is unknown and...

LeTarte EM11KA Aluminum Double Miter Saw 1.5HP Motors Dual Blades 230/460V 3Ph

• Manufacturer: LeTarte

Used, in Good Working Condition, Tested OK. 11" and 10.5" blades. Wired for 230V. If this item ships as Flat Rate Freight please see details in Shipping tab

Sampson MN150-10 Double 45° Miter Saw 10" Blade 1.5Hp Motor 230/460V 3Ph Notche

• Manufacturer: Sampson

Used, in Good Working Condition. Tested. Pneumatic air foot pedal controls. Motors are both wired for 480V 3 phase. This was setup to cut plastic window frames. If this item ships as Flat Rate Freight please see ...

Tannewitz Advantage Series 36" Vertical Bandsaw Stock #7508

• Manufacturer: Tannewitz

Tested and ready-to-go! 38.5" x 31.5" table 1/2" blade 6" dust 440V, 3 phase Work light Tilting table with fence

Delta 34-761 Unisaw Table Saw 10" Tilting Arbor 3Ph 3 HP 240/480V 57" Fence

• Manufacturer: Delta

Used, in Good Working Condition. Removed From a Working Environment Tested. 3 phase wired for 230V. Blade guard has some defects. Fence is setup for 57" . Could extend few more inches if it had a bigger table. If...

Powermatic 72-TA Table Saw 14" Tilting Arbor 7.5Hp 240/480V 3Ph 52" Fence

• Manufacturer: Powermatic
• Model: 72-TA

Used, in Good Working Condition, Tested. 7.5 HP motor 208-230/460V 3Ph. Wired for 230V Cast iron top 38x48" If this item ships as Flat Rate Freight please see details in Shipping tab

Delta Rockwell Vintage Radial Arm Saw 12" Blade 5Hp Motor 20" Rip 230/460V 3Ph

• Manufacturer: Rockwell
• Model: 40-C

Used, in Working Condition, Tested OK. This saw does not come with a bench top. This saw is wired for 480V. Motor can be wired for 220/440V. 1" arbor If this item ships as Flat Rate Freight please see details in ...

CTD F255 Straight Cut off Chop Saw 10" Blade 3450RPM 3Hp 3Ph Aluminum Metal

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. Hand operator. Both hands have to be used to operate. Has oiler for the blades. Blade is 10". 3 hp motor. 230/460V. Wired for 480V. If this item ships as Flat Rate Frei...

Powermatic 66 Table Saw 10" Tilting Arbor 3Ph 5Hp 230/460V 52" Fence

• Manufacturer: Powermatic
• Model: 66

Used, in Good Working Condition, Tested. Has a Baldor 5 HP motor 230/460V 3Ph. Wired for 460V. No motor starter box. New spindle bearings. No cover for the lower unit. Fence is not mounted correctly for the tape ...