Used variable speed in Mexico

MSC-828 VERTICAL BAND SAW MODEL 3612-3, 36" THROAT DOALL BRAND

• Manufacturer: DoAll
• Model: MSC-828

DOALL (U.S.A.) Model 3612-3 vertical bandsaw, 36" throat, 24" x 30" table, variable speed, band welder, 3 HP motor, s/n. 153-66811

MSC-777 VERTICAL BAND SAW, 16" THROAT, DOALL BRAND

• Manufacturer: DoAll
• Model: MSC-777

DOALL (E.U.A.) Saw vertical tape, 16 "throat, max height 10", table 24 "x 24", variable speed, with tape welder, s / n. 447983

W 1832S

Double angle cut left 60° / right 45°. Hydraulic blade tensioning. Manually rotating saw arc. Automatic height adjusted by touch device. Variable blade speed by motor inverter. Digital blade speed readout. Manual...

MSC-791 VERTICAL BAND SAW WITH DEGREE TILT, 18" THROAT, MAX. HEIGHT 20", MARVEL BRAND

• Manufacturer: Marvel
• Model: MSC791

Marvel (USA) Vertical band saw with inclination of degrees model 81, 18 "throat, max height 20", automatic feed, inclination to degrees, variable speed, motor 7.5 HP, s / n. 2040

MSC-773 VERTICAL BAND SAW, 36" THROAT, DOALL BRAND

• Manufacturer: DoAll
• Model: MSC-773

DOALL (E.U.A.) Saw vertical tape model V-36, 36 "throat, max height 9", table 30 "x 30", variable speed, 1.5 HP motor, s / n. 36463836

W 1824

Manually rotating saw head. Miter cut 0 ° - 60 ° (R ). Blade tension gauge. Hydraulic screw. Screw pressure regulator. Variable blade speed by inverter. Digital blade speed display. Arc height setter on control p...

MSC-808 DOUBLE POST HYDRAULIC AUTOMATIC BAND SAW, 20" X 24" CAPACITY, W.F. WELLS BRAND

• Manufacturer: W.F. Wells

W.F. WELLS (U.S.A.) Model R2024 Double Post Hydraulic Automatic Band Saw, 20" x 24" capacity, Variable Speed, with automatic feed, 24" max. feed, s/n. A1712

W 2127SD

Saw height adjustment from the control panel. Double angle cutting left / right. Hydraulic blade tensioning device. Variable blade speed by motor inverter. Motor to clean the chips from the band saw. Manual screw...

W 1320SD

Touch screen and length encoder. Angular cut left 0° / right 45°. Blade tension meter. Screw pressure regulator. Vertical presses for bundle cutting. Variable blade speed by inverter. Chip conveyor. Manual arc he...

W 1824SD

Touch screen and length encoder. Mitre cut 0° - 45° (R). Hydraulic blade tension. Screw pressure regulator. Vertical presses for cutting bundles. Variable blade speed by inverter. Motor to clean the chips from th...

MULTIPLE SAW - DISCS DIAMETER 14

• Manufacturer: amxmachinery.com
• Phase type: Three-phase

Features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with 14″ diameter rip saw blades and can be equipped with p...

AUTOMATIC PANEL SAW

TPS-SH - AUTOMATIC PANEL SAW Production panel sizing solution for the small to mid-sized manufacturer. The industrial machine design combined with user friendly PC control interface ensure accurately dimensioned...

POWER SUPPLY FOR BAND SAW - 1/8 HP 220V, 1 PHASE

PART: 2SG-AF06 - FEEDER FOR BAND SAW - 1/8 HP 220V, 1 PHASE BAND SAW - 1/8 HP 220V, 1 PHASE New with warranty For band saws up to 24" Ideal for light to medium duty use on a bandsaw and is spring-loaded, ensuring...

BAND SAW - 28" CAPACITY

PART: 2AA-8-MARK-II - BAND SAW BLADE - CAPACITY 28" - AMADA NEW WITH WARRANTY SPECIFICATIONS & FEATURES Rectangular Capacity Standard Capacity M6 High Column Capacity (Optional) Blade at 90° 18" x 22" (457 mm x 5...

BAND SAW - VILANTES 36" - WITH FEEDER - TRI STATE

PART: 12225 - BAND SAW - VILANTES 36" - WITH FEEDER - TRI STATE USED - VERY GOOD CONDITION 8,500 PPM blade 2" max.17'4", 8 "max. material width, variable speed feed works 6'x6' rolls Main motor: 20 HP, 230/460 V,...