Building Filters
Machinery
Description Technical characteristics Head tilt up to 22.5 the clockwise/anticlockwise (automatic setting in 22.5 the , 45 the , 90 the ) Manual head tilt adjustment at intermediate angles (mechanical stop) Built...
Thessaloniki, Greece
V Rock Cutter
- Manufacturer: GTM Machinery Series
Stone cutting machine with a robust monoblock construction. Specially designed in a V structure that makes it ideal for processing decorative paving and stone cladding on interior and exterior walls. The speed of...
Thessaloniki, Greece
Machinery
Description Basic parts KAIMAN PIX 700 F 700 mm diameter tungsten carbide cutting disc No.2 horizontal vises No.2 vertical vises Micro-drop disc lubrication system with pure oil Store in a shrink plastic bag FOR ...
Thessaloniki, Greece
Machinery
Description Basic accessories KAIMAN PIX 700 THETA 700 mm diameter tungsten carbide cutting disc No.2 horizontal vise No. 2 vertical clamps Microdrip disk lubrication system with pure oil Storage with heat-shrink...
Thessaloniki, Greece
Machinery
- Manufacturer: Formindustrie
Description Basic components PANDA 300 ECHO Cutting area protective kit 300 mm diameter tungsten carbide cutting disc Horizontal vise Vertical vise Compressed air pistol with spiral tube (for cleaning the machine...
Thessaloniki, Greece
Machinery
Description Basic parts PANDA 400 400 mm diameter carbide cutting disc No.2 vertical vises No.2 horizontal vices Full protection of the cutting zone with a metal protective case Lateral support surfaces on both s...
Thessaloniki, Greece
SIRIO SHE
SIRIO SHE heavy type, semi-automatic vertical saw, cutting angle from 0 ° to 45 ° right and from 0 ° to 60 ° left. Recommended for general cutting machine applications. Cutting dimensions Φ120 and parallel 180x10...
Karditsa, Greece
Cutting machines
Description VERTICUT technical characteristics No. 2 fusion carbide cutting discs with a diameter of 400 mm No.2 pneumatic vertical vise No.2 three-phase motors, 1.1 kW, 2800 rpm Maximum V cutting capacity: 83 mm...
Thessaloniki, Greece
Machinery
Description Basic parts PANDA 550 550 mm diameter tungsten carbide cutting disc Horizontal vise No.2 vertical vises Cutting Area Protection Kit (pneumatic up feed) Digital Display Degrees (Manual Disc Rotation) A...
Thessaloniki, Greece
Machinery
Description Basic parts PANDA 550 THETA 550 mm diameter tungsten carbide cutting disc Horizontal vise No.2 vertical vises Cutting area protection kit Air gun with spiral hose (for cleaning the machine) Micro-drop...
Thessaloniki, Greece
Machinery
Description Technical characteristics Head tilt: 90°- 45°- 22.5° and intermediate angles through front mechanical stops suitably protected from chips No. 2 carbide cutting discs with a diameter of 500 mm Hydrauli...
Thessaloniki, Greece
Cutting machines
Description Technical characteristics TR 152 No. 2 tungsten carbide cutting discs with a diameter of 550 mm Checklist No.4 vertical clamps on each head No.1 horizontal clamp on each head Movable reel head (2m) US...
Thessaloniki, Greece
Machinery
Description Standard equipment Carbide cutting disc with a diameter of 400 mm Side support plates on both sides Cutting angle from 45 The counterclockwise up to 45 The clockwise on a vertical axis and 45 The cloc...
Thessaloniki, Greece
Semi-automatic iron saws
Description Heavy duty machine Cast iron construction absorbs shocks and ensures greater cutting stability and longer blade life The vertical vise ensures effective and safe clamping even when cutting pipes The a...
Thessaloniki, Greece
MX-2 MECAL SAW FOR LATH
- Manufacturer: Tornos
MX-2 V. Lath saw. With 2 cutting discs for cutting the corner. VIEW TECHNICAL DATA Rotation speed 2800 rpm Electrical frequency Hz 50 Installed electrical power kW 1.5 Air consumption of compressed air per work c...
Agios Dimitrios, Greece