Used Processing in Wallonia, Belgium

Shake-out conveyer ULRICH 4000 mm x 1200 mm

Driven by cardan joint With elastic elements Needs 2 motors of ± 10 - 11 KW On 20 springs,

Rotary table shot blast plant SISSON-LEHMANN, Ø 1800 mm

Type: CADETTE, Serial number: 163 In good condition With filter SISSON-LEHMANN, Type 8PE, 2 hp, 220/380 V, 1420 rpm

Furnace loading conveyor UHDE

Motor UHDE type SM20/4, 1,1 kW, 220 V, 1410 rpm Loading bunker upside 1600 mm x 1500 mm, h.1400 mm Rotation on ball bearing supported ring

Greensand mixer capacity 5-6 t /h, SPEEDMULLOR 30A

Motor NORMACEM 13,2 kW, 220/380 V, 960 rpm Direct drive without gearbox, 2 horizontal grinding wheels With switch cabinet, pneumatic cover for sand filling, idem separated for the additives

Grinding tool GREIF, Ø 50 0mm, 60 m/s, cone pulley

• Manufacturer: Greif

7,5 kW, 220/380V Grinding stone: Ø 500mm x 127mm, width 50 mm

Steel scrap feeding device KÜTTNER for furnace

• Manufacturer: Küttner

With 2 vibrating motors UHDE, type SM20/4 On mobile peadestal Center distance: 1330 mm, driven by drum motor BAUER; 1,5 kW; 220/380 V Wth loading shank taper 1500 mm x 2000 mm

1993 Vibrating conveyor, 5700 mm x 900 mm x 220 mm

• Manufacturer: Jöst

Motor JÖST, type JV 176-550, 1,6 kW , 400 V, 3,75 A With two vibrating engines, with cover sheet, Ø entry 63 mm

Shake-out conveyer CHAUVIN, 3300 mm x 600 mm

• Manufacturer: Chauvin Arnoux

Type: Bi-Rol18TBZ, Serial number: 55149 External dimensions: 3400 mm  x 1080 mm, h. 1500 mm | Useful dimensions: 3300 mm  x 600 mm | Motor: 7,5 kW, 1500 rpm

Vibrating chut, 4590 mm x 600 mm x 360 mm

2 vibrating motors ITALVIBRAS, type : MASI 15/1600, serial number: 68867, 1,5 kW, 220/380 V, 50 Hz With 4 silent blocs, motors on the side Input height 360mm, output height 360mm With framed in the form of I and ...

Treatment ladle, 6,5-7 t, COLLIN

With teapot spout, 260 mm long With oilbath gearbox This treatment ladle was used for desulfurization

Core sand batch mixer, ± 80 l, BOTON-MERLET

Type: BM 80 EL, serial number: 870-567 Motor BONFIGLIOLI, 3 kW, 1410 rpm, 230/400 V Exit 280 mm, height 190 mm, mixer with 3 arms With senor for door closing With pneumatic valve With electric control cabinet, M...

Double floor type grinder DÜRRRSCHMIDT-VITEX, 760 mm, 50 m/s

Motor CEM, type: MJPP180M14, serial number: 543154, 18,4 kW, 1430 rpm, 220/380 V Driving by belts, stone max. 760 mm, width 60 m With control cabinet, continious speed 50 m/s

Double floor type grinder DÜRRSCHMIDT/VITEX, 760 mm, 50m/s

Motor CEM, Type: MJPP180MN4, serial number: L617626, 22 kW, 220/380 V, 1450 rpm Driving by beltsstone max 760 mm, stone width 60 mm Speed 50/s Files plates 260x90 mm (2x) With control cabinet

1972 Pneumatic sand transport 250 l, RONOT

Serial number: 16083, construction year: 1972 Max operating pressure 4 bar Max operating temperature 25°C Pneumatic clap (valve) Sensor with 2 flaps at the entrance Sand input Ø 145 mm, sand output Ø 70mm Capacit...

Shake-out grid for green sand with one axle for imbalancement

3Kw Grid 1x aperture 80mm, second row aperture 35mm, installed on 12 springs Ø external 140mm, height 260mm, exit from below 1400 x 670mm